Results 1 to 4 of 4

Thread: Problem in Network configuration windows server 2008

  1. #1
    Join Date
    Jun 2009
    Posts
    21

    Problem in Network configuration windows server 2008

    Can you help me to setting up a network with Windows Server 2008, here several days that I am trying to configure this without success. Here is some info

    ADSL Modem ===> PC: Windows 2008 server ===> router ===> PC1
    ^ ===> PC2
    ! ===> PC3
    ! ===> FP4
    Printer

    I would like to access the Internet, to the printer as well as to files on the server from any PC connected to the router.

  2. #2
    Join Date
    Dec 2008
    Posts
    28

    Re: Problem in Network configuration windows server 2008

    You need to install the driver for your printer on the client (unless it is an ethernet printer to open the shared folder on the client you done.

  3. #3
    Join Date
    Dec 2008
    Posts
    23

    Re: Problem in Network configuration windows server 2008

    This configuration uses the following parameters:

    DSL Router

    IP Address: 192.168.1.1
    Subnet Mask: 255.255.255.0

    Windows Server 2008

    IP address of the DSL network card: 192.168.1.2
    Subnet Mask: 255.255.255.0
    Gateway: 192.168.1.1
    IP address of the LAN adapter: 192,168,168,249
    Subnet Mask: 255.255.255.0

    The default gateway of the DSL network adapter (external network) points to the IP address of the DSL router.

    Work Station client

    IP address of the LAN adapter: 192.168.168.10
    Subnet Mask: 255.255.255.0,
    Gateway: 192,168,168,249

  4. #4
    Join Date
    Dec 2008
    Posts
    41

    Re: Problem in Network configuration windows server 2008

    In Windows Server 2008 for Itanium-Based Systems, Setupldr.efi is no longer present on the installation media. To install Windows Server 2008 from the Extensible Firmware Interface (EFI) shell, insert the installation media in the computer and choose Boot from EFI Shell in the boot menu. Then switch to the drive that contains the installation media, navigate to \efi\boot\, and run Bootia64.efi.

Similar Threads

  1. Windows Server 2008 R2 loses ability to connect to network share
    By Astrid in forum Networking & Security
    Replies: 8
    Last Post: 25-09-2010, 07:37 PM
  2. Network Access Protection in Windows Server 2008
    By Feng in forum Networking & Security
    Replies: 6
    Last Post: 28-08-2010, 06:59 PM
  3. Problem in Network Configuration Operators group in Windows 7
    By Bottlenecked in forum Operating Systems
    Replies: 6
    Last Post: 12-08-2010, 05:10 PM
  4. Windows Server 2008 Network Hang
    By Superboks in forum Operating Systems
    Replies: 3
    Last Post: 15-07-2009, 10:53 PM
  5. Windows 2008 Print Server Configuration
    By Luiz in forum Windows Server Help
    Replies: 4
    Last Post: 27-11-2008, 12:56 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,711,629,359.46829 seconds with 17 queries