D'link router reset password

[Valerian]

Hello,

Yesterday, I had formatted my computer. All my passwords were stored on my computer (the firefox saved them).

If you have lost my password of the router, is there any way to recover?

My router is a D-LINK DSL-G624T.

[TX-Snakebyte]

Hi,

Go to http://192.168.0.1 in your browser. If you did not change the login & password

Standard login = "admin"
password = "" (nothing, leave field empty)

[SimonBoss]

You must enable routing (command "ip routing") and then configure a default route: ip route 0.0.0.0 0.0.0.0 192.168.0.1.

And a "no ip default-gateway" too, since you have the default route.

Explanation: if you want to do routing, you need to set your path in a default static route and enable routing.

[Kylebrn]

Follow the steps below :

1. Upgrade Firmware if needed.
   
   
2. (Please visit the D-Link tech support website at: http://support.dlink.com for the latest firmware upgrade information.)
   
   
3. Take a paperclip and perform a hard reset. With the unit on, use a paperclip and hold down the reset button on the back of the unit for 10 seconds. Release it and the router will recycle, the lights will blink, and then stabilize.
4. After the router stabilizes, open your browser and enter 192.168.0.1 into the address window and hit the Enter key. When the password dialog box appears, enter the username admin and leave the password blank. Click OK.

[Una]

Well, mine is the WR642G, but must be equal for all:

Click on the menu "Wireless"> "Wireless Settings".

Enable the checkbox "Enable Wireless Security"
Under "Security Type" select "WPA-PSK/WPA2-PSK"
In "PSK Passphrase" choose a password of 8 to 63 characters.

Click "SAVE"

After going in the "System Tools"> "Password" and change the password of the ADMIN (can change the user name too.