Results 1 to 5 of 5

Thread: Problem with Wireless Router Connectivity

  1. #1
    Join Date
    Jan 2009

    Problem with Wireless Router Connectivity

    hi there.......

    A major problem I am having about router connectivity. I have tried 4 wireless routers regarding the problem but all are responding in a similar fashion. These all routers are from different companies. Belkin, D-link, Netgear and Linksys are the name of the router brands. the devices gets fully set up, then they provide connection, and after 20 seconds or so, they get disconnect. I also tried to Unplug the wireless router and Plug back in, and again I get another 20 seconds of connection.

    Please help me regarding this problem...........

    your views will be appreciated............

  2. #2
    Join Date
    Apr 2008

    Re: Problem with Wireless Router Connectivity

    try using Dynamic Address:

    Dynamic IP addresses are most frequently assigned on LANs and broadband networks by Dynamic Host Configuration Protocol (DHCP) servers. They are used because it avoids the administrative burden of assigning specific static addresses to each device on a network. It also allows many devices to share limited address space on a network if only some of them will be online at a particular time. In most current desktop operating systems, dynamic IP configuration is enabled by default so that a user does not need to manually enter any settings to connect to a network with a DHCP server. DHCP is not the only technology used to assigning dynamic IP addresses. Dialup and some broadband networks use dynamic address features of the Point-to-Point Protocol.

  3. #3
    Join Date
    May 2008

    Re: Problem with Wireless Router Connectivity

    Use this method:

    • Click the Start button, and then click Run.
    • The Run window appears.
    • Type netsh diag gui, and then click OK.
    • The Help and Support Center window appears.
    • In the left side of the window, click Scan your system.
    • The Network Diagnostics perform a series of tests.
    • Locate Network Adapters under Modem and Network Adapters and click the plus (+) to the left of your network adapter.
    • Note whether DefaultIPGateway lists PASSED.

  4. #4
    Join Date
    Apr 2008

    Re: Problem with Wireless Router Connectivity

    You may be getting Phone signal interfereance. Make sure you have a Microfilter.

    A microfilter is a small device that plugs into your normal BT telephone socket and splits the line into both a standard BT telephone socket and a ADSL broadband socket.

    You must have one microfilter connected to each BT socket, that has any device connected to it, on the line the ADSL service is enabled for even if you will not connect the ADSL modem / router to that socket.

    The microfilter must be the first device plugged into the BT socket.

    Failure to have a microfilter correctly installed on all BT socket you use may result in interference (buzzing noises etc.) on your telephone and / or reduced performance and possible loss of service on your broadband access.

    If you have a burglar alarm that uses the telephone line it is important not to forget this needs to be connected through a microfilter. We also strongly recommend that you check the correct operation of your burglar alarm after installation of a broadband service on your telephone line.

  5. #5
    Join Date
    Jan 2006

    Re: Problem with Wireless Router Connectivity

    Router connectivity test
    Do this test and you know if it is router problem or not.

    Run tracert command.
    Type: tracert
    Is this test causing a connectivity loss?
    If it does, it is a router problem.
    Solution is to upgrade router firmware or replace it with different brand

    And this

    Dropped calls WiFi
    I have a US Robotics Router.
    While looking through the router config settings in the config utility,
    under "Access"/"Special App." I came across a setting for "PC-to-Phone" apps.
    I enabled this and Skype now works perfectly across my wireless network.

    According to the USR helpfile, so-called special application "need multiple connections that are inhibited by NAT

Similar Threads

  1. Limited or no connectivity when connecting to a wireless router
    By akbar in forum Windows Vista Network
    Replies: 3
    Last Post: 22-03-2011, 07:27 AM
  2. Hathway wireless router connectivity
    By Holbrook in forum India BroadBand
    Replies: 4
    Last Post: 27-02-2011, 05:50 AM
  3. Wireless Connectivity problem
    By jennaolson24 in forum Networking & Security
    Replies: 2
    Last Post: 05-03-2010, 05:45 PM
  4. Connectivity Problem with DSL Router
    By Kushan in forum Networking & Security
    Replies: 4
    Last Post: 27-03-2009, 03:12 PM
  5. Wireless Router limited or no connectivity issue
    By Demetrius in forum Networking & Security
    Replies: 3
    Last Post: 23-02-2009, 08:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts