Results 1 to 6 of 6

Thread: 4x1gb pc3200r(ddr400) ram's not working with MSI K8T Master2 FAR7

  1. #1
    Join Date
    Jun 2012
    Posts
    34

    4x1gb pc3200r(ddr400) ram's not working with MSI K8T Master2 FAR7

    My system is having a MSI K8T Master2 FAR7 and I have bought 4 x 1 GB pc3200r (ddr400) ram's. The problem that I am facing now is that when I am installing the rams on the board then the system is not booting and posting on the screen. Does that mean there is something wrong with the ram?? Is there anything I can do to confirm the same? I donít have much idea about all these things so any help regarding this will be highly appreciated.

  2. #2
    Join Date
    Jul 2011
    Posts
    456

    Re: 4x1gb pc3200r(ddr400) ram's not working with MSI K8T Master2 FAR7

    No booting and posting makes me guess that there might be something wrong with one of the 1 GB pc3200r (ddr400) ram's. I will suggest you to use single ram at a time first and check out if there is anything wrong with any of them. If you find all of them to be working alone then you can start adding the other rams. I mean if the first ram is working fine then you can add other one and check out if the system is booting, if it boots properly then you can add the third one and again make a test. Just check out what I have suggested and let me know what you get for further help.

  3. #3
    Join Date
    Jun 2012
    Posts
    34

    Re: 4x1gb pc3200r(ddr400) ram's not working with MSI K8T Master2 FAR7

    I have tested out the rams one by one and they are appearing to be working fine alone. I have found that when I am using just 2 rams then the system is booting fine but as soon as I am adding third ram then I am hearing beep while booting it up and there is no post on the screen. I donít think there should be any issues as such and the board should handle 4 x 1 GB pc3200r (ddr400) ram's without any such issues. I have bought them after confirming that they will work fine. What might be the possible cause of the issue, I donít think there is anything wrong with any of them ram. You can refer to the memory specification of the board for confirming the same.

    Memory:
    • Max Supported Memory 8.0 GB
    • Supported RAM Technology DDR SDRAM
    • Supported RAM Speed 200 MHz, 333 MHz, 400 MHz, 266 MHz
    • Supported RAM Integrity Check ECC Chipkill , ECC
    • Supported RAM (Registered or Buffered)

  4. #4
    Join Date
    Jul 2011
    Posts
    456

    Re: 4x1gb pc3200r(ddr400) ram's not working with MSI K8T Master2 FAR7

    Now thatís weird, even I donít think that there should be any issues as such. Anyways can you let me know which cpu your system is using?? I doubt your CPU to be capable of handling pc3200r. Juts post back the details of your cpu so that I can have a better idea of your case and will try to help you with possible solution as well.

  5. #5
    Join Date
    Jun 2012
    Posts
    34

    Re: 4x1gb pc3200r(ddr400) ram's not working with MSI K8T Master2 FAR7

    As far as cpu is concerned I am using AMD Dual-Core Opteron 270. I did not understood what you meant by ďI am aware that some of the CPUís are capable of handling memory above PC-2700 but I doubt if they are capable of handling pc3200rĒ anyways below is the detail of AMD Dual-Core Opteron 270.

    Processor:
    • Type - AMD Dual-Core Opteron 270
    • Number of Cores Dual-Core
    • Cache Memory Details -L2 - 2 MB - 2 x 1 MB
    • 64-bit Computing -Yes
    • Processor number- 270
    • Compatible Processor Socket- Socket 940
    • Clock Speed- 2.0 GHz
    • Processor Qty -1.0
    • Core Voltage- 1.3 V/1.35 V
    • Thermal Specification -67.0 įC
    • Architecture Features -HyperTransport technology, AMD64 technology, integrated memory controller


    Cache Memory:
    • Installed Size -2.0 MB


    Expansion / Connectivity:
    • Compatible Slots - 1.0 x Processor - Socket 940

  6. #6
    Join Date
    May 2011
    Posts
    471

    Re: 4x1gb pc3200r(ddr400) ram's not working with MSI K8T Master2 FAR7

    I guess your 4 x 1 GB pc3200r (ddr400) ram's are not fully compatible with the board thatís why only two of them are working out. If thatís not the issue then you can try swapping ram slots and check out if they are working fine all together or not. If you still face the same issues then you can try using the ram in some other system to check out if they are working on different board. If they are working on other board then as I have mentioned they might not be fully compatible with MSI K8T Master2 FAR7.

Similar Threads

  1. MSI K8T Master2 FAR7 having no video with ATI HD3850
    By Camdra in forum Motherboard Processor & RAM
    Replies: 6
    Last Post: 06-06-2011, 10:49 PM
  2. K8T Master2 FAR CPU cooling not working properly
    By Reuben 1 in forum Overclocking & Computer Modification
    Replies: 6
    Last Post: 07-04-2011, 10:21 PM
  3. DDR2 RAM 4x1GB or 2x2GB
    By Multi-Boot in forum Motherboard Processor & RAM
    Replies: 4
    Last Post: 13-11-2009, 02:44 PM
  4. DDR400 in DDR 333's place?
    By dancingpappu in forum Motherboard Processor & RAM
    Replies: 4
    Last Post: 20-09-2008, 08:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •