Go Back   TechArena Community > Hardware > Motherboard Processor & RAM
Become a Member!
Forgot your username/password?
Tags Active Topics RSS Search Mark Forums Read

Sponsored Links



After updating BIOS to 0070 on Intel DZ77BH-55K, F2 won?t work

Motherboard Processor & RAM


Reply
 
Thread Tools Search this Thread
  #1  
Old 14-06-2012
Member
 
Join Date: Jan 2012
Posts: 70
After updating BIOS to 0070 on Intel DZ77BH-55K, F2 won?t work
  

My system is having Intel DZ77BH-55K and I was not having any issues with the same and everything was normal. Yesterday I had updated BIOS to 0070 and since then I am not able to enter the bios setup utility. Nothing happens when I am pressing F2. I did not had any issued in installing the bios but I don?t know what has went wrong. Is there anything else I can do now??? Any suggestion?

Reply With Quote
  #2  
Old 14-06-2012
Member
 
Join Date: Feb 2012
Posts: 76
Re: After updating BIOS to 0070 on Intel DZ77BH-55K, F2 won?t work

In that case I just wanted to know if you have tried clearing cmos if not then try it out and let me know it is it is making any difference.

By Using Motherboard Jumper:
You can take out the board and check out for the jumper on the board, the location might vary according to the board. If you are not able to find it out then go through the motherboard manual. It is mostly near the CMOS battery. There will be 3 pins where the jumper might be joining the center pin. You just have to take out the jumper and then join the opposite pin. Just to explain the same I detail if the jumper is joining center pin to left pin then switch it to center pin to right. After doing that wait for some seconds and then switch back the jumper to its original place. When you are done with the same then turn on the machine and see if you are able to enter the bios setup utility.

By removing battery:
This is the easiest way of clearing the cmos, you just have to turn off the system, remove the power cord, take out the board, take out the battery, wait for some second, reseat the battery, plug the power cord, turn on the system.
Reply With Quote
  #3  
Old 14-06-2012
Member
 
Join Date: Oct 2011
Location: mumbai
Posts: 50
Re: After updating BIOS to 0070 on Intel DZ77BH-55K, F2 won?t work

just before that
make sure your keyboard f12 button is working correctly
Reply With Quote
  #4  
Old 15-06-2012
Member
 
Join Date: Dec 2011
Posts: 47
Re: After updating BIOS to 0070 on Intel DZ77BH-55K, F2 won?t work

Since you have mentioned that you have updated the bios recently you might be having a backup of the same. If so then I will suggest you to better try out the bios recovery method:
Using USB Thumb Drive:
Copy the recovery file (*.BIO) to your USB thumb drive and Plug the same to your system and turn off the machine and unplug the AC power adapter.
Now remove the BIOS Configuration Jumper and turn on the system. Now just wait for the update process to get completed. Make sure that you are not interrupting the process in between, the system will let you know when the process gets completed. Once the process gets completed then remove the thumb drive and reseat the BIOS Configuration Jumper and restart the system.
Using Floppy Disk:
Copy the recovery file (*.BIO) to your Floppy Disk and insert the same to your system and turn off the machine and unplug the AC power adapter.
Now remove the BIOS Configuration Jumper and turn on the system. Now just wait for the update process to get completed. If the floppy drive LED is lit then the process might be in process. So make sure that you are not interrupting the process in between. The system will let you know when the process gets completed. When the process gets completed then remove the Floppy Disk and reseat the BIOS Configuration Jumper and restart the system
Using CD-ROM:
Copy the recovery file (*.BIO) to your CD and insert the same in to your system CD-ROM drive and turn off the machine and unplug the AC power adapter.
Now remove the BIOS Configuration Jumper and turn on the system. Now just wait for the update process to get completed. If the CD-ROM drive LED is lit then the process might be in process .So make sure that you are not interrupting the process in between. The system will let you know when the process gets completed. When the process gets completed then remove the CD and reseat the BIOS Configuration Jumper and restart the system

Just try out the same and let me know if that?s helping. If you have any further issues with it then let me know I will try to help you with other possible solutions.
Reply With Quote
Reply

  TechArena Community > Hardware > Motherboard Processor & RAM
Tags: , , ,



Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads for: "After updating BIOS to 0070 on Intel DZ77BH-55K, F2 won?t work"
Thread Thread Starter Forum Replies Last Post
Intel Desktop Utilities keeps spinning when launched on Intel DZ77BH-55K Rish!On Motherboard Processor & RAM 4 18-06-2012 12:40 PM
How to disable C1E on Intel DZ77BH-55K? Shika Hardware Peripherals 1 22-05-2012 11:11 AM
LAN stopped working after updating the intel dh67bl BIOS to 0150 Zshawn Motherboard Processor & RAM 9 26-03-2012 10:37 PM
ATI Radeon 5970 unable to work after bios updating Sera-phina Monitor & Video Cards 5 23-03-2011 10:28 AM


All times are GMT +5.5. The time now is 03:54 AM.