System is continuously rebooted after Installing MSI Z68A-GD65 (G3) motherboard.

[C.White]

Sponsored Links

I install a new MSI Z68A-GD65 (G3) motherboard because my older motherboard is having two low performances. So, I install a new motherboard and after installing the motherboard my system is restarted continuously. Black screen is arrive and after that system is rebooted. I tried many things but still the same problem is there. I don’t understand the problem why system is rebooted? Anyone have idea how to solve this problem.

System configuration of my system:

• Motherboard: Z68A - GD65(G3)
• CPU: Intel i7-3820 3.8 GHz, 10mb Cache
• Ram: 2 x Corsair 4 gb
• PCI-Express: GeForce GTX 560 Ti
• OS HD: Seagate 120 GB SATA 7200 RPM drive
• Other HDs: 2 x Western Digital Caviar Black 1TB 7200 RPM SATA 6.0Gb
• PSU: Silverstone SST- ST60F-80 Plus SMPS 1500W
• Optical: Samsung 18X DVD±R DVD

[ADELYN]

I also got this problem in my Gigabyte GA-890FXA-UD7 motherboard. So, I troubleshoot my system by myself and my system is out of the problem. First remove your Ram, Hard drive, Graphic card, Optical drive and run your system with minimum peripherals. Just insert your one RAM Stick in #1 DIMM slot and connect your VGA to Onboard port. Check it and if still same problem is occurred then remove that RAM stick and Use another RAM Stick. Still same problem then let me know.

[C.White]

I checked my system with single RAM and still same issue. So, I Tried with another RAM but still same problem. I cheeked both Ram in Another system and both RAM are working proper. I remove all peripheral like HDD and PCI-E cards but cannot solve the problem. Any other solution ?

[ADELYN]

Check the memory configuration from MSI website. This board support DDR3 1066/1333/1600 MHz memory stick. Make sure your RAM frequency is not lower than above. Make sure you’re your CPU is Fitted properly and your heat sink and CPU Cooling System is working well.

[C.White]

My system RAM is DDR3 1333MHz which is supported in this board. I checked CPU and CPU cooling System and both is fitted perfectly and working fine but still same problem.

[Gimbya]

I have Intel Desktop Motherboard DH67BL which is fitted on my system. When I purchase this board, I got the same problem. My system is rebooted continuously and I tried many things but cannot solve the problem. My one friend suggests me to check CPU socket for Bend Pins and some pins are banned in my new motherboard. So, I replace the board from retailer and now all is working fine. May be you also have same problem.