Go Back   TechArena Community > Hardware > Motherboard Processor & RAM
Become a Member!
Forgot your username/password?
Register Tags Active Topics RSS Search Mark Forums Read

Sponsored Links



How to restore Restore Intel DZ68DB bios to factory default

Motherboard Processor & RAM


Reply
 
Thread Tools Search this Thread
  #1  
Old 10-05-2012
Member
 
Join Date: Apr 2012
Posts: 18
How to restore Restore Intel DZ68DB bios to factory default
  

I am having intel DZ68DB mother board. When I updated my bios settings after then I am facing new problem. The problem is that I am unable to see the display on the starting of the computer. I see the display when the windows starts loading. I want to restore my bios settings. How do I restore he bios settings?

Reply With Quote
  #2  
Old 10-05-2012
Member
 
Join Date: May 2011
Posts: 292
re: How to restore Restore Intel DZ68DB bios to factory default

There are many ways to restore the bios settings. The easy way to restore the bios is clearing the CMOS. To clear the CMOS remove all the power cables from the computer and even the CMOS battery for an hour. This will clear the CMOS and will let you the default bios settings in your computer. The second way is to moving the BIOS jumper from pins 1-2 to 2-3 and turning on the system, it should take you in to maintenance mode in BIOS and there you can load the defaults. If you don't get any display, wait for a minute after you turn on the computer and press F9, then press the letter Y and then press F10 and the letter Y again. Wait for a couple of seconds then turn off the system change the BIOS jumper to its original position and boot the system up again. You will be having the default bios settings in your computer.
Reply With Quote
  #3  
Old 11-05-2012
Member
 
Join Date: Jun 2008
Posts: 227
re: How to restore Restore Intel DZ68DB bios to factory default

To restore the bios settings of the intel DZ68DB mother board follow the steps.
1. Turn off the computer.
2. Change the BIOS jumper configuration by moving the pins of the jumper from 1&2 to 2&3
3. Turn on the computer.
4. The system should be displaying the splash screen and will go into the BIOS configuration automatically.
5. Change the IDG Primary Video Port to Auto.
6. Change the Primary Video Adapter to Auto.
7. Exit form BIOS. The system will prompt you to power down the system and return the BIOS configuration jumper to RUN.
8. The system should now start normally with the BIOS screen showing when the system starts.
Reply With Quote
Reply

  TechArena Community > Hardware > Motherboard Processor & RAM
Tags: , , , ,



Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads for: "How to restore Restore Intel DZ68DB bios to factory default"
Thread Thread Starter Forum Replies Last Post
Getting "red screen error" while doing a Full restore using factory restore disk of HP elite 7100 Nearer Operating Systems 3 12-02-2012 05:45 PM
how do I Restore PB to factory default? RobertA Portable Devices 3 06-05-2011 06:43 AM
How to restore BlackBerry Playbook to factory default? Aerona Portable Devices 4 05-05-2011 10:44 AM
Restore HP EliteBook 2740p to Factory Default? Gaganadipika Portable Devices 3 16-09-2010 10:31 AM
How to Restore Sony Vaio to Factory Default Settings Xmen Portable Devices 3 10-10-2009 08:01 PM


All times are GMT +5.5. The time now is 11:32 PM.