Unable to install i7 2600K processor graphics

[pramodthdc]

Sir.
I have recently built my PC with following configuration:
-ASUS P8Z68 –M Pro motherboard
-intel i7 2600K Sandy bridge CPU
-8GB corsair 1600 Mhz DDR3 RAM
-MSI R6670 MDIGD5 GRAPHIC CARD with 1GB video memory and Dx 11 capable
-650 watt Cooler master power supply
-Windows 7 Professional 64 bit
I have monitor attached to graphic card.
Problem:
1. Lucid Virtu does not starts. Whenever I try message comes “ cant run with current GPU configuration. Disabling Virtu, and exiting. (remember to enable Virtu after the problem is fixed”.
BUT THERE IS NO WAY TO FIND WHAT GPU CONFIGURATION. How to start VIRTU?
2. If I “enable” i mode in BIOS setting , system does not boot at all.
3. If I try installing the driver for Intel HD graphic of motherboard the message comes “ This computer does not meet the minimum requirement for installing the software” and I am not able to install the driver.
So how to start VIRTU and install intel Hd graphic driver?
THANKS IN ADVANCE TO ALL.

[Geniee]

See first you need to install all the video adapters of your system. First is the on board and second is the gpu. Go in Device Manager and check you see both of them. Then go in bios and set the same on gpu mode. It can be compatibility issue also. Try to run Lucid virtu in the end when you are done with gpu drivers installation. Second thing Lucid Virtu lacks support multiple displays.