Want help to find custom liquid cooler for LGA 775 socket

[Aai Yo!]

Sponsored Links

I had acquired bored and decided to attempt something ambitious commencing from side to side my system. To not merely go from air cooling to liquid cooling, additional than in addition to design and create the entire thing. I am curious commencing from other users who have tried liquid cooling solutions. What is the unconditional maximum you be able to crank out of the q9550. What are the limits for the x48 chipset. Are there several additional inherent flaws which might prevent me from hitting 5-6 GHz. The plan is to generate a heat sink through massive amounts of internal surface area, exceptional conductive properties, extremely diminutive resistance to fluid flow, and hermetically sealed up to a number of ridiculous pressure.

[Bethany Johson]

I do in addition realize that to facilitate Intel recommends not utilizing a cooler weighing additional than ~.5 kg, I have comprised and not gotten far sufficient to design the mounting brackets case strain relief. Underside, exploded view demonstrating contact connecting LGA 775 and copper base Initial materials acknowledged as pieces of copper and aluminum. My current progress through the entire of the lathe work completed, plus the two fittings.

[Habiba22]

The inherent flaws in you accomplishment 5-6GHz through the Q9550. The WR CPU occurrence for the Q9550 is 4.88GHz. Cascade cooling utilized for that with the intention of WR had the CPU temps at -105C or so. The X48 is not the most excellent chipset for C2Q over clocking, a P45 board be supposed to acquire you further. You determine to in addition necessitate the NB to be cooled extremely well for FSB as high as you will need. The moreover way, I am looking forward to observe what this custom cooler can do with it.

[Fadheela]

What accurately is cascade cooling. If I be able to flow sufficient fluid through the cooler that to facilitate it stays room temp, why might this not be sufficient. The motherboard is not going to acquire replaced. Perhaps next chipset. I in addition plan on adding GPU, NB, and probably ram into loop. They determine to have to observe.

[Edi]

The Cascade cooling is far above the ground ends sub ambient cooling utilizing compressors etc. Give the impression of being in our sub ambient cooling discussion more information in sequence on that. Did you become aware of the temp to mentioned. Just so you be familiar with, that to facilitate type of cooler be able to be completed by somebody for you. Starts at regarding $700, and if a dual cascade, double it. It's world record cooling setups.

[Nabhanyu]

Yes I did become aware of the temps. The temps 105 is attractive cool. The method this is being built, I might in addition utilize CO2 or N2 and run a simple refrigeration cycle and acquire below ambient. I almost certainly might not desire to go below the dew position by the way I live in Ohio and do not desire to worry regarding condensation in my case. In several cases I would be the one building it.

[TBina]

I did a number of more machining at present; I had acquired the adapter for the NPT fittings and the clamp ring totally. I still necessitate reaming a small number of holes, and take a file to the parts in a small number of areas. The superior news is, only two additional pieces until I be able to pressure test it. If the whole thing works out correctly the whole thing be supposed to be superior to ~500 psi of pressure.

[Delisa]

I am tranquil debating what I am going to utilize as a working fluid. If I am approximating the idea of utilizing a number of sort of oil for the reason that of its high specific heat and resistivity, other than I am contemplating setting the complete thing up as a refrigeration cycle and utilizing something similar to CO2. Anybody else tried anything this ambitious.

[Kabilan]

That is what the most of the users were saying, they determine to observe though. Am I going to necessitate upgrading my ram. I am working with 1333 MHz ddr3 ram. If my fsb goes to similar 2000+ do I necessitate matching that w my ram. Performance testing w dissimilar fluids is similar to phase 2 or 3 of this operation. First I have encompassed to build and pressure test, almost certainly up to ~150 psi, it be supposed to go up to ~500 theoretically that is the entire my air compressor determine to do.

[chitti r]

I think I necessitate to design strain relief and suitable motherboard / chassis mounts so that to facilitate if it gets bumped that it does not cause the motherboard to splinter. Intel recommends that with the intention of you do not utilize heatsinks that to facilitate weigh more than a certain amount, I not be able to seem to locate documentation describing what it is although I remember reading this somewhere a small number of years back. If anybody happens to be familiar with where I be able to locate this information in sequence be able to they post it here.

[RopeME]

I am thinking I determine to acquire something from a car for the reason that they are mass produced and be supposed to have encompassed a higher cooling capacity and am cheaper. And for a pump, I am giving the impression of being into utilizing a marine grade bilge pump. Something commencing from side to side a steel housing that I be able to submerge so that to facilitate be able to place it in the cooling reservoir and utilize that to cool the pump. As far as fluids go, I am planning to utilize various type of oil for the reason that of their dialectic qualities and high thermal capacity.