no monitor signal with 16 GB DDR3 RAM on GA-Z68XP-UD3P gigabyte motherboard.

[Woodward]

I have recently build my new PC here are the specs GA-Z68XP-UD3P gigabyte motherboard, 16 GB DDR3 RAM, i7 Intel processor, Corsair Force GT 120GB SSD. I want to install operating system in this system but the monitor is not getting signal while getting while trying to boot with 4 stick of RAM that has been installed in my GA-Z68XP-UD3P gigabyte motherboard. The power of computer is ON but there is no signal on monitor, but when I install only single RAM I am able to get into Bios. So guys I don’t have any clue why there is no signal on monitor, please help?

[Battista]

This issue is all because of your newly built system. First you should do memtest 86 on flash module on at a time. You can pas boot successful on bios, you can load operating system and generally configure the machine using single RAM first then you can test your other RAM stick using the single ram.

[Geniee]

Memtest86 is the procedure you have to unpack and install thumb drive correctly and then you have to change the precedence to the inserted key because you boot the machine up, now dim passes 10 consecutive then the memory will top knotch then use one slot for maul refers by doing this you can test your every RAM.