Gigabyte GA-G41M-Combo is restarting automatically

[Chitti's]

Sponsored Links

I am not able to find out the reason why our computer is getting restarted randomly. Following is the computer configuration of mine system.

Motherboard
GA-G41M-Combo (rev-1.4)

CPU
Intel Core 2 duo E7500
RAM
2 sticks (DDR2)
a)ZION-667-1GB PC2-5300(333MHz)
b)ZION-800-2GB PC2-6400(400MHz)
graphic card
ATI Radeon HD 5770
PSU
Corsair VX450W
hard disk
Seagate ST380211AS-80GB

Let me know if you can provide help on the above mentioned issue.

[ADELYN]

Can you tell me how older is the power supply which you are having?
Do you have plug the extra 12v power cable near of the CPU?
Let me know which version of BIOS do you have installed on the computer?

[Leslie f]

Well after looking at the system specification of yours I am suspecting that two different kind of memory modules which are mixing with the motherboard of yours. I recommend that you should install either of the RAM on the computer and see whether it is working or not.

[Marquise]

I do agree with you. I wanted to tell you that there could be compatibility issue between the RAM and the motherboard which you have installed on the computer. if I am not wrong the motherboard which you are having support for the speed of 667 and 800 Mhz. I recommend that you should visit the official website of the RAM manufacturer and look for the QVL. If the motherboard which you are having on the computer is getting matched with the memory modules then I don’t think so it will ever work for you.

[crook]

I having doubt on PSU of yours. make sure that the PSU which you are having on the computer is generating enough power supply. If there is an issue than you should get any other PSU and see whether the thing is working or not.

[LavinaD]

According to me you have to reset CMOS setting on the computer. you can use the following instruction to do the same.

• You have to enter CMOS setup and look for option which can be stated as load the fail-safe defaults./
• You should select the same and Press Y to proceed further.
• After the completion of process you have to Save everything and Exit from the setup.

[ADELYN]

Let me know whether you have installed the latest version of BIOS on the computer. if your answer is no than I am suggesting that you should visit the official website of the motherboard manufacturer and look for the latest version of BIOS. Also you can get the latest version of the drivers and install the same on the computer.