Results 1 to 7 of 7

Thread: New build using Gigabyte GA-880GMA-USB3 and AMD FX 6100 does not show 16Gb RAM

  1. #1
    Join Date
    Oct 2011
    Posts
    83

    New build using Gigabyte GA-880GMA-USB3 and AMD FX 6100 does not show 16Gb RAM

    Yesterday i have installed the AMD FX6100 on this motherboard. Along with this i have also installed the 16gb (4x4) of 1600 DDR3 RAM. The memory is on gigabytes list and board supports FX 6100 (using F3 BIOS). Even after all this i cannot able to get signal strength on the monitor. Nothing appears on the monitor. Seems like i haven't installed the RAM yet.

  2. #2
    Join Date
    May 2011
    Posts
    470

    Re: New build using Gigabyte GA-880GMA-USB3 and AMD FX 6100 does not show 16Gb RAM

    It cannot be due to the full configuration of the memory banks? That would be logical. It may be that suddenly becomes unstable under full loading of the Ram. This may well be stable enough for the CPU operation, but a GPU is much more sensitive, because the more clearly to the memory accesses. May well be that the driver changes the storage and handling, therefore causing the problem. The driver should be no problem, because Llano may indeed up to 32GB.
    So I tend to type of the ram. The manufacturer optimizes its Ram for Intel CPUs generally yes, so it may be that the problems on AMD makes.

  3. #3
    Join Date
    May 2011
    Posts
    350

    Re: New build using Gigabyte GA-880GMA-USB3 and AMD FX 6100 does not show 16Gb RAM

    According to the latest BIOS it hardly needs to be questions that will surely have installed. So the BIOS shows the BOOT less correctly? What does Windows?

  4. #4
    Join Date
    Feb 2010
    Posts
    669

    Re: New build using Gigabyte GA-880GMA-USB3 and AMD FX 6100 does not show 16Gb RAM

    I am not an overclocker, I can "stabilize" the RAM in the BIOS and operating system with 16 GB?

    Right now, all settings are auto, but also recognized correctly.

    The RAM is a fairly conservative

  5. #5
    Join Date
    Oct 2010
    Posts
    189

    Re: New build using Gigabyte GA-880GMA-USB3 and AMD FX 6100 does not show 16Gb RAM

    If the motherboard is not with the auto settings and now you will probably do nothing more than the left hand set of things? Only 3x2GB is not a problem, I've just tested. Each car to everything in the BIOS. Now Become a bit with the values which you have given me to play and then get back to me with the results. So I am again, I've tried out the recommended setting. Unfortunately, with little success. With the same 8GB and 12GB partially settings were identified. There is no discernible system behind it. I do not know what slow. If I only have 3 bars in it, he recognizes 6GB good only if all six are in it he makes problems.

  6. #6
    Join Date
    Oct 2010
    Posts
    163

    Re: New build using Gigabyte GA-880GMA-USB3 and AMD FX 6100 does not show 16Gb RAM

    GSKILL always innovating and researching new products and we have been the first to analyze these reports in our laboratory. And with no less than 16 GB of RAM in 4 modules of 4 GB. Something that has not been seen, and although most of the boards do not support more than 8 GB. This kit of 16 GB have been recognized without problems on my Gigabyte X38 DQ6, which was 8 GB maximum amount of RAM, according to manufacturer's specifications.

  7. #7
    Join Date
    Feb 2010
    Posts
    589

    Re: New build using Gigabyte GA-880GMA-USB3 and AMD FX 6100 does not show 16Gb RAM

    If programs are not designed to take advantage of all that memory and you put more ram and more ram will only make the machine remains trick and bulging with no benefit ... is newbies fighter ram this whole beyond the 4 gb.

Similar Threads

  1. No post and No video from MSI 880GMA-E35 (FX) New Build
    By $Iain$ in forum Motherboard Processor & RAM
    Replies: 6
    Last Post: 18-03-2012, 07:37 PM
  2. Memory for Gigabyte GA-880GMA-USB3
    By Alln.Do in forum Motherboard Processor & RAM
    Replies: 7
    Last Post: 30-12-2011, 03:06 PM
  3. Gigabyte GA-880GMA-USB3 is not stable on my new build
    By Juggy in forum Motherboard Processor & RAM
    Replies: 10
    Last Post: 27-08-2011, 11:40 PM
  4. DVD or USB installation of windows 7 for Gigabyte 880GMA-UD2H
    By Iravan in forum Motherboard Processor & RAM
    Replies: 4
    Last Post: 21-08-2011, 07:43 PM
  5. Massive temp difference between hp foxconn and gigabyte GA-880GMA-USB3
    By Kim|ball in forum Motherboard Processor & RAM
    Replies: 5
    Last Post: 05-07-2011, 10:17 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,711,645,643.92314 seconds with 17 queries