Results 1 to 11 of 11

Thread: Getting BSOD with Corsair CM3X2G1600C9D6

  1. #1
    Join Date
    Oct 2011
    Posts
    67

    Getting BSOD with Corsair CM3X2G1600C9D6

    I've had blue screens steadily since the purchase of this equipment. When I put my Extreme Memory memtest86 profile provide me all kinds of errors. If I leave the BIOS settings default to optimize the RAM goes. I'm trying to settle on whether it is a RAM matter or a configuration trouble. Any help you could give me would be greatly appreciated.

  2. #2
    Join Date
    Nov 2010
    Posts
    389

    Re: Getting BSOD with Corsair CM3X2G1600C9D6

    The number you have given is for a module that is part of a set. And I would check the voltage of the CPU / QPI and see what is set when you have XMP enabled.

  3. #3
    Join Date
    Dec 2010
    Posts
    473

    Re: Getting BSOD with Corsair CM3X2G1600C9D6

    I tried all the sticks of RAM individually and pass them all. I tried to prove to everyone in different configurations, while successively at 1600MHz. Memtest is not any configuration of the RAM .More than 6 GB, at the same time as running at 1600MHz. The XMP profile seems to put the DRAM voltage of 1.79V. I tried by hand setting the RAM from 1.6 to 12 GB and still memtest.

  4. #4
    Join Date
    Oct 2011
    Posts
    64

    Re: Getting BSOD with Corsair CM3X2G1600C9D6

    Are you running two different kits of 6 GB ram, 2 GB or 6 individual modules? Its condition. 6GB States, although his memorandum states 12GB.

  5. #5
    Join Date
    Mar 2011
    Posts
    417

    Re: Getting BSOD with Corsair CM3X2G1600C9D6

    The kit consists of 6 x 2 GB sticks. To make clear, I tested each stick independently, after experiencing BSOD with 12 GB installed. This occurred together in the default configuration, and the XMP profile. All clubs passed independently. After 2 sticks installed and experienced. Then I installed and tested 3 sticks. In its wake. After three sticks or 6GB. Memtest would join the mistakes I've added more RAM.

    The same 3 sticks (6 GB), which went through a XMP profile last night, not Memtest this morning. Then manually DRAM voltage to 1.66 and QPI voltage to 1.35. The RAM passes the preliminary test.

  6. #6
    Join Date
    Dec 2010
    Posts
    473

    Re: Getting BSOD with Corsair CM3X2G1600C9D6

    I would suggest contacting the OEM is not a minor part.But what I have posted it sounds like there may be some other trouble.

  7. #7
    Join Date
    May 2011
    Posts
    471

    Re: Getting BSOD with Corsair CM3X2G1600C9D6

    Quote Originally Posted by Himalayan View Post
    I would suggest contacting the OEM is not a minor part.But what I have posted it sounds like there may be some other trouble.
    Nevertheless the module can be part of a 6GB kit, TR3X6G1600C9, look! I'm not clairvoyant enough to assume the configuration RAM.

  8. #8
    Join Date
    May 2011
    Posts
    379

    Re: Getting BSOD with Corsair CM3X2G1600C9D6

    No need to disregard the administrator! PC Specifications RoscoSlack not only demonstrates a 2 GB module. Details are sometimes lost.

  9. #9
    Join Date
    Jun 2011
    Posts
    608

    Re: Getting BSOD with Corsair CM3X2G1600C9D6

    Once again I'm sorry, but it is an OEM and distributor CM3X2G1600C9D6 would only be responsible for the guarantee. The lower part will have three modules TR3X6G1600C9 labeling CM3X2G1600C9 / D3 or TR3X6G1600C9. There may have been some that were poorly labeled, but in this case is an OEM supplier so you will pay.

  10. #10
    Join Date
    Oct 2011
    Posts
    75

    Re: Getting BSOD with Corsair CM3X2G1600C9D6

    Old I know, probably dead, but I have the same computer, in the same place (ugh) and I have a club that has died. I have emailed on this cyber and I'm awaiting a response.

    Would sun if I called and tried to RMA via Corsair? Even if I can offer and the receipt as proof of purchase? I just want to get this cleared up and make sure I have all ends covered and thanks in advance for any help

  11. #11
    Join Date
    Jul 2011
    Posts
    430

    Re: Getting BSOD with Corsair CM3X2G1600C9D6

    I received a response from Cyber Power, and needless to say won’t the answer I wanted. I was told that since the team was more than a year old from the time of purchase, the parts warranty has ran out and I have to buy my own replacement. Unfortunately, I've learned my lesson about buying them.

    I had to change and depends on the hardware warranty from the manufacture anything .Anyway I can provide them the bill and other suits are the stickers on them so bad give them a call

Similar Threads

  1. Getting BSOD with Corsair F115
    By IkshuL in forum Hardware Peripherals
    Replies: 5
    Last Post: 30-10-2011, 11:03 PM
  2. Replies: 10
    Last Post: 24-10-2011, 10:36 PM
  3. Getting BSOD with Corsair TWIN2X4096-6400C5C
    By Hipolit in forum Motherboard Processor & RAM
    Replies: 7
    Last Post: 03-10-2011, 10:30 PM
  4. Getting BSOD with Corsair TW3X4G1600C9D
    By Czeslaw in forum Motherboard Processor & RAM
    Replies: 10
    Last Post: 03-10-2011, 10:26 PM
  5. Getting BSOD with corsair CMT6GX3M3A2000C8
    By Rafferty!!! in forum Motherboard Processor & RAM
    Replies: 5
    Last Post: 24-09-2011, 10:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •