Results 1 to 6 of 6

Thread: Corsair CMZ16GX3M4A1600C9 - listed as 10600 rather than 12800?

  1. #1
    Join Date
    Jul 2011
    Posts
    88

    Corsair CMZ16GX3M4A1600C9 - listed as 10600 rather than 12800?

    Just installed it, ran memtest86 and scrutinize that is scheduled as 10,600 instead of 12,800?

    I enter the bios at the end of memtest and the identical - memory timing set to auto by means of a value of 1333.It is faulty or this ram is not listed in 12800?

  2. #2
    Join Date
    Jul 2011
    Posts
    456

    Re: Corsair CMZ16GX3M4A1600C9 - listed as 10600 rather than 12800?

    Quote Originally Posted by Olenka View Post
    Just installed it, ran memtest86 and scrutinize that is scheduled as 10,600 instead of 12,800?

    I enter the bios at the end of memtest and the identical - memory timing set to auto by means of a value of 1333.It is faulty or this ram is not listed in 12800?
    Depending on where you perceive it. More than probable that only the SPD information, which by no means changes and it has nothing to do with the real speed.

  3. #3
    Join Date
    Jul 2011
    Posts
    88

    Re: Corsair CMZ16GX3M4A1600C9 - listed as 10600 rather than 12800?

    Memory SPD Information’s
    • Slot 1 to 0 to 4: 4096 MB PC3-10600 - Corsair CMZ16GX3M4A1600C9 XMP

  4. #4
    Join Date
    Aug 2011
    Posts
    294

    Re: Corsair CMZ16GX3M4A1600C9 - listed as 10600 rather than 12800?

    Try to enable your xmp profile and then check settings again.

  5. #5
    Join Date
    Aug 2011
    Posts
    253

    Re: Corsair CMZ16GX3M4A1600C9 - listed as 10600 rather than 12800?

    The AMD chipset does not support XMP, I guess. MB said specifications which supports up DDR3 1866 (OC) or 1333 otherwise. Therefore, it comes with JEDEC # 4, DDR3 1333.

    When the BIOS settings instead of Auto 1600-1333, the automatic synchronization settings emerged as 11.0, 11, 11, 29, 41 and 2T. This is not stable. I tried rising the memory voltage to 1.6v NB and CPU voltages somewhat. I also tried XMP times of 9.0, 9, 9, 24, 41 and 2T. This was not constant or even greater than before tensions. Any suggestions?

  6. #6
    Join Date
    Jul 2011
    Posts
    285

    Re: Corsair CMZ16GX3M4A1600C9 - listed as 10600 rather than 12800?

    If this is steady, should be good to go with that set. No need to adjust anything there. As for the other team goes, you have to overclock the CPU, not just memory. Sorry, me personally, I've never played with an AMD procedure.

Similar Threads

  1. Is it possible to use pc3 12800 and pc3 10666 Ram on same motherboard?
    By Gopala in forum Motherboard Processor & RAM
    Replies: 7
    Last Post: 21-03-2012, 06:29 PM
  2. Replies: 4
    Last Post: 10-12-2011, 06:13 PM
  3. Corsair CMZ16GX3M4A1600C9 unable to work in AMD
    By Florjan in forum Motherboard Processor & RAM
    Replies: 8
    Last Post: 02-10-2011, 10:27 PM
  4. Corsair CMZ16GX3M4A1600C9 Vengeance for P67 motherboard
    By Bhadran in forum Motherboard Processor & RAM
    Replies: 4
    Last Post: 27-09-2011, 10:34 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,711,613,813.88440 seconds with 17 queries