Recommended settings for Corsair CMP6GX3M3A1600C8 on Gigabyte GA-X58-UD3R

[DakshaMira]

Does anyone successfully tested the Corsair CMP6GX3M3A1600C8 RAM module on mainboard and if there are no recognized problems, what are the most excellent settings meant for these? I'm not concerned in overclocking, except I would carry out a few if it ran through the stock coolers and if it would eliminates the BSODs. The BSOD only happens during the cold Boot. So I am asking you, is there anything like BIOS recommended settings for my system to resolve this issue?

[Baldwin]

There are no noticeable changes except I increase the voltage of the GDR. So I blended the Prime95 test does not directly get a freeze, I need to at the 1066 Mhz DDR voltage to 1.7 and the voltage at 1333 to 1.8, including nothing comes easy. The RAM is actually specified as 1.5v. If another component is causing these freezes during Prime95 test then yes but this would increase the tension at the extreme RAM bring nothing. I just find 1.8v for the RAM is being sold for extremely 1.5v. Different but not run. Chill the RAM also very hot, but still touchable. Funnily enough, just run memtest without any problems even with 1.5v.

[Jailekhaa]

You have to know the topic a little closer. If I change DRAM voltage and it is improving, it does definitely not the Ram is the cause. The DRAM Voltage in your computer is set in the CPU. Say board or CPU are rather the error components. Basically, you can see it like this - the Ram is faulty or the like, there are black, blue screens or it is nothing. If a freeze occurs, which is caused by Ram controller who ever sits on the concept, conducted either in the northbridge or the CPU.

[Dritan]

It does not always have to be a completely new gaming PC. Often it is quite sufficient to upgrade a CPU upgrade package processor, cooler, motherboard in addition to RAM. For the reason that usually stuck in the old computer is still a present graphics card, a sufficiently powerful power supply and drives that you do not need to replace.

[Savannah87]

The BIOS of Gigabyte is aesthetically a slight dissimilar from the classic BIOS originate on additional motherboards, for example Asus or DFI.

Load Fail-Safe Defaults are the factory settings to employ in support of system operations through negligible richest routine for which the system is steady. A type of most favorable parameters, to utilize a term frequently found into further BIOS which corresponds to a comparable preference.