Results 1 to 4 of 4

Thread: How to increase Gigabyte X48 DQ6 E0 E8500 performance at 4085Mhz

  1. #1
    Join Date
    Nov 2010
    Posts
    12

    How to increase Gigabyte X48 DQ6 E0 E8500 performance at 4085Mhz

    I was competent enough to run much improved ram timings at 1066 (2.1V) with the 3.8 GHz over clock speed, but after using the 2.00 D band, running at 860 (1.8V) the timings so far appeared further limited. I allow it boot with ram settings on automatic mode, read them with Everest, and then put them manually. Automatic mode had the tRD at 13. Earlier I well able to run a tRD of 6 but at present it is 9 is as small as I can go. Can a different strap help to increase the performance? Because my 860 MHz is not working so well! So anyone have a suggestion for this post then please reply me.

  2. #2
    Join Date
    Aug 2009
    Posts
    652

    Re: How to increase Gigabyte X48 DQ6 E0 E8500 performance at 4085Mhz

    I think that you may possibly could have improved timings if you left vDIMM on 2.1v, 5-4-4-12/13 with DDR-860 or even better. So for a better performance I would suggest you to check the proper setting through which you can get proper results. So my suggestion is try to use much better tRD may higher than 7 or 8. Because tRD 6 at 400 FSB through DDR-1066 is not ordinary from what I observe in the forum, but you may still use 7 or 8 with tighter timings.

  3. #3
    Join Date
    May 2009
    Posts
    857

    Re: How to increase Gigabyte X48 DQ6 E0 E8500 performance at 4085Mhz

    I think that using the "B" strap according to your prescribe settings it usually help you out by using the following strap:
    tRD = 7 is regularly steady up to about 420MHz or even more.
    tRD = 8 should perform up to around 460MHz
    In the inferior to middle 400MHz series, if you perform the D-strap it regularly need tRD to be 1 step upper (looser) than the B-strap. In the mid to higher 400MHz series, the tables are reversed. Some have established that stability is simpler to approach by using the D-strap as an alternative of the B-strap.

  4. #4
    Join Date
    May 2009
    Posts
    979

    Re: How to increase Gigabyte X48 DQ6 E0 E8500 performance at 4085Mhz

    I transferred to the 2.5B strap for 1.02 GHz. by now getting better timings. I attempted to apply both 2.1 as well as 1.8 on 806, but it did not allow honest timings as I required to perform for a better performance. I did not undertake 2.00B strap, but may get round to it. I've got the OC bug once more currently that I've got temporary sensibly under control with an Extreme 120 and Northbridge fan. Had to try for 4Gig. I'll discover additional with the memory. I'll observe what it can take. Up to now 3Dmark06 went from 17210 to 17790; however FarCry2 Short Ranch did not progress at all. (3.8 may up till now be the performance cute spot.) Getting improved memory benchmark at 1.03 GHz and tRD of 7 than I did with 1.06 GHz and tRD of 6. Earlier best was 60ns, 80785 read, 8485 write, and by now showing 58.7ns, 8695 read, 9050 write, and have not ended refining settings.

Similar Threads

  1. How to increase the performance of C++ programs
    By Rikin J in forum Software Development
    Replies: 2
    Last Post: 10-08-2013, 10:26 AM
  2. Does Raid 1 increase performance ?
    By xing in forum Overclocking & Computer Modification
    Replies: 4
    Last Post: 23-09-2009, 11:17 AM
  3. E8500 on DDR2 Performance?
    By Matrix316 in forum Motherboard Processor & RAM
    Replies: 3
    Last Post: 11-04-2009, 02:02 PM
  4. Increase Performance for your PC
    By Honorata in forum Overclocking & Computer Modification
    Replies: 4
    Last Post: 21-01-2009, 05:46 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,713,864,068.80244 seconds with 16 queries