Need Dual CPU AM3 motherboard for 4 Tesla C1060s?

[Khajit]

Currently I am having 4 Teslas, packaged, in the box and I require mother board, if possible dual CPU. I need dual CPU AM3 mother board with the full PCI 2.0 which have the support for 4 Tesla C1060. Is there any motherboard available in the market that can fulfill these requirements? Something similar to Foxconn Destroyer, I am unable to find this in the hardware list I am having. Can anybody help me to find out Dual CPU AM3 motherboard for 4 Tesla C1060s?

[Amd Athlon]

Socket AM3 doesn't support multiple CPUs - neither the socket, nor the CPUs designed for it have the requisite extra HT link to permit it. About the best you will be able to do is a 6 core Thuban Phenom II and a 790FX or 890FX motherboard, which will get you 6 cpu cores with 2 channel DDR3 memory and (theoretically at least) 4 x 8 PCI-e lanes hanging off a 8Gb/s HT3.0 link.

If you want something like the Tyan 7025, then a socket C32 or G34 board with 4000 or 6000 series Opterons is probably about the best you can do.

[gygabite]

Socket AM3 is not having any support for the multiple CPUs neither for the CPU nor for the socket, it is having requirement for the extra HT link for permitting it. According to me the best thing you can have is the six CPU core with the support of two channels DDR3 memory because of you will at least get the 4 x 8 PCI-e lanes that will hang off 8 GB/s HT3.0 link.

[Joshua]

If you need something similar to Tyan 7025, then a socket C32 or the G34 board with the 4000 or 6000 series Opterons is perhaps the best thing you can do.

There is no dual CPU way out, but you can use the MSI 790FX-GD70 for the quad GPU setups, but it has the x16 x8 x16 x8 setup. According to me most of the 4x gtx 295 is using any of the Asus P6T7 or the EVGA 170-BL-E762-A1.

[Russell]

ASUS P6T7 is the best for my 4x setup, it does not have any megabyte problem, but it is having lots of heat problem. I have got this at very cheaper rate of P6T 3; it is just a term of case, PSU and the heat. I have even built the box with the very low cost of $ 185 P6TSE board in combination with 3 GTX295s and believe me it just works great.