E206922 PS-1 mobo information needed

[attitude.ashwin]

I can hardly find any info for this motherboard called E206922 PS-1. By some seaching on google I came to some site that gave some information about E206922 PS-1 v.3.1. So can anyone tell me what is the difference between E206922 PS-1 mobo and E206922 PS-1 V.3.1? Thanks in advance

[ApPy10]

The E206922 PS-1 motherboard has an intel pentium 700Mhz sl4p8 that you can find more info here. If you want to get more info and drivers/manuals etc on these older motherboards go here: http://www.pcchips.com.tw/PCCWeb/Dow...uID=45&LanID=0

[T.J.]

I will give you a tip to find you the specs about your board, if you have got cpu + ram + hdd, setup all the hardware and install XP then use either of these softwares called cpu-z or wcpuid.Wcpuid is a legacy app, may work better with older system i think. cpu-z is latest. Cpu-z has a motherboard TAB that shows the maker and model.

[TEcH GuRuJI]

There are also some good softwares that can give. Here, download Everest to get a full diagnosis of your PC.

After some search I found the tech specs for your board:

Socket 478 supports the Intel® Pentium® 4 processor
CHIPSET

VIA® P4M266 (NB) & VT8233(SB) Chipset
P4M266 V-Link Host system controller and VT8233 V-Link Client to PCI/LPC bridge
Peak Bandwidth 266MB/S 8-bit V-link Host Controller
Integrated Savage 4 2D/3D Video Accelerator
LPC I/O - IT8705F
LAN: RealTek 8100/B
AC97 Audio Codec: Compliant with AC97 2.2 specification
SYSTEM BIOS

2 DDR DIMM sockets and 2 DIMM sockets support (can not be used simultaneously)
Two 184-pin 2.5V DDR SDRAM (DDR266/DDR200) or
Two 168-pin 3.3V SDRAM (PC133/PC100)
Maximum: 2GB(DDR SDRAM or SDRAM)
I/O INTERFACE