Has anyone fitted a Freezer 7 Pro and swapped the standard push pins with a bolt through kit?
If so, any comments on how easy it was, did it seem worth while, etc?
Cheers,
Has anyone fitted a Freezer 7 Pro and swapped the standard push pins with a bolt through kit?
If so, any comments on how easy it was, did it seem worth while, etc?
Cheers,
This one you are talking about :
Wow I think I will buy one of those kits instead of a new Xigmatek cause I cant get my AC Freezer to go in. I can only get 3 on the 4 pins in and I dont think thats very safe.
how to remove or unplug this push pins? will you please explain me here.
If you have a cooler that has push pins and you want to turn it into a bolt-through cooler, you will need to remove the push pins.
Rotate the black plastic part clockwise with respect to the white plastic part before separating them. This will let you remove them with no damage to the push pins. You will be able to mount the push pins back, if some day you desire, just the way they were.
If you rotate counter clockwise, it will require to lift only one tab instead of two. However, the tiny alignment peg on the white part will not disengage from the black part. You will have to force it, which could cause damage.
Of course, you can also use pliers to just break off the push pins. Even though this may help release stress, it will be destructive to the pins.
Bookmarks