There is an power switch (SW), reset switch (SW) and etc, all this are connected to the motherboard from the power button, reset button over the casing. When you see closer to the switch (SW) you can see it connect into the motherboard, the SW will insert and connect to 2 metal pin in the motherboard.
In the easy way to describe, when you press the power button, this 2 pin will be electrically connected to each other, and send the motherboard a signal to power on the system.
To start the computer without using the power button, take out the “Power SW”, make sure you identify which 2 pin belong to the power button (refer to the labeb behind), use a test pen or any metal surface to touch the two pin, it won’t have any electrick spark, just allow the electrict signal from 1 pin sed to another pin, your computer will be start without pressing any power button.See the image, which pin you have to remove.
Please bare in mind, do not test this if you do not have any basic technical knowledge, or consult some professional before you do it.
Bookmarks