Gigabyte GA EP45-DS3 driver and Sata

[VirusKey]

Sponsored Links

Hello, I have a GigaByte Motherboard GA EP45-DS3, fresh into a new configuration with an Intel core 2 duo 7300 and 2GB ram is all the well recognized in the bios native. How to install xp without sata driver supplied on disk?
Motherboard comes with a dvd but no driver disk for the sata driver and xp will not settle for that I can not provide drivers on diskette, the gigabyte site is nothing for the sata. Is there a modification to do in the bios so that I can install xp ?

Thank you

[Amd Athlon]

Just put the controller in "PATA native" Thus SATA will be recognized as any IDE drive and you will not need drivers. See manual for the motherboard.

integrated chipsets are no longer needed drivers except for RAID or AHCI mode.

[VirusKey]

I thank you confirmed what I read in the manual of the My gigabyte motherboard. pleasure and thank you again.

[VirusKey]

Hello, I notice that the system of setting duo core is the view that! bracket 1 does not return to its location on the motherboard, even in strongly supporting her will not return, Raven managed to come back from 1 minute but no more.

in any case the system is stable and does not heat with an average of 45 °

intel should think of changing this system.

[Joshua]

Core 2 Duo or Fan ?

I assume that you speak of fan. In this case check that the leg is rotated in the right direction, and lift, when you draft if it is rotated and the small black rod is inserted in the center of the edge (the one that goes through the hole in the motherboard) then you can not push. We need the black rod is removed from the tip. When you put the first leg of the tip goes in the hole, then sank the black stem to remove the 2 notches from the tip which will lock the setting.