Results 1 to 3 of 3

Thread: Temperature X2 4800 +

  1. #1
    Join Date
    Mar 2008
    Posts
    349

    Temperature X2 4800 +

    Hi,

    a few days ago, the Temperature of my cpu began to increase rapidly, reaching full load between 65 and 66 º ... but what is more surprising that rises very fast, not rising as fast before. Before coming to no more than 61 º in full load

    It turns out that I took the heatsink, cleaned the cpu well, I changed the paste, change the sink side, so that the holder pointing down, and there fell between 1 and 2 degrees, but even goes up to 64 or 65 º

    the most certain is that the heat does, but I would like to know what temperature the cpu would be in danger ... it lies between 68 and 70 degrees ... very close to what we currently reaches full load

    My question :
    1. it is normal that the cpu fan to draw air in place, the target air cpu?
    2. I have a cooler-cnps7000B ALCUE (aluminum and copper) where my old, old thing, will my x2?

  2. #2
    Join Date
    May 2008
    Posts
    279

    Re: Temperature X2 4800 +

    Hey check that looks this good since the cooler on the cpu to make good contact with my taste for that temperature is much cpu also check that the fan spinning this well and high rpm (and if it is normal that the fan pull air down because you have to ventilate the fins of the heatsink to cool the cpu does not happen to you Let him give it back like this but not always pulling air into the sink from the cpu) could also count as a walk refrigeration inside your cabinet could count how many fans you have and some are located inside the box as well pasta mind that you used in the CPU heat sink Ãs I say good luck.

  3. #3
    Join Date
    Mar 2008
    Posts
    349

    Re: Temperature X2 4800 +

    I changed the paste that comes from the factory with the cpu cooler, for artic silver 5, he made a layer above all concerned that the cpu is not very thin layer that was spilled by either side, right. The cabinet comes with 3 fans, 1 front that shoves air, which draws a rear air and a side that puts air:

    Motherboard 33 ° C (91 F)
    Processor 54 ° C (129 F)
    CPU No. 1 / No. 1 core 30 degrees C (86 F)
    No. 1 CPU / core No. 2 30 ° C (86 F)
    GPU 56 ° C (133 F)
    Seagate ST3250620AS 39 ° C (102 F)

    those are the temperatures at idle

    full to the fullest is 65 degrees, as did a test with 10 minutes to Prime95 dual core and not pass it by now

    the cpu what had to 3GHz with 1.375v ... I got off to 2.6ghz with 1.35v, the difference is not more than 1 or 2 degrees

Similar Threads

  1. AMD Athlon 4800+ on MSI K9N SLI motherboard
    By Pee-Paa in forum Motherboard Processor & RAM
    Replies: 4
    Last Post: 09-04-2012, 11:26 AM
  2. Q9550 temperature issue? Suggest if the temperature of my rig fine or not?
    By gaurav0110 in forum Motherboard Processor & RAM
    Replies: 6
    Last Post: 10-04-2011, 01:07 AM
  3. 4800+ X2 Voltage problem
    By Kuan-yin in forum Hardware Peripherals
    Replies: 5
    Last Post: 04-07-2010, 06:27 AM
  4. HD 5770 vs HD 4800
    By Zindin in forum Monitor & Video Cards
    Replies: 3
    Last Post: 14-10-2009, 10:15 AM
  5. Need ATI 4800 Drivers
    By Metechman in forum Windows Software
    Replies: 3
    Last Post: 12-02-2009, 03:24 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,713,980,402.38339 seconds with 17 queries