Need assistance with OCing Gainward Bliss Geforce 9500 GT

[Asis]

I got my innovative system. For my taste its attractive superior and it’s not invented to be high-end gamer apparatus. But still I would similar to play a number of the innovative games similar to GTA4 and Fallout 3 on the highest superiority I am able to. So I read the GeForce 9500 GT is not a gaming card and to a certain extent mid to low-end. I cannot crank up the 128bit but I am able to the clocks. It came with the program ExperTOOL but it merely lets me up the shader clock (10 MHz diff.) The rest is not obviously locked but the supervisor is not moving.

[MaCiNToSHeR]

The Rivatuner is extremely superior. Here is a number of information if regarding RT. If it seems to be too hard for you, the EVGA Precision tool determine to do presently extremely well Start putting clocks up (5% increase at first, if it runs, 5% additional and then gradually increase those little by little), then when you observe the difficulty (crash/high temps/texture errors), start lowering clocks and you have to observe which is the highest steady clock.

[Bindusar]

All accurate I upped the Core and Shader Clock (connected) to 585.71Mhz and 1450 Mhz from with the fan working at 50% and Temp at 47° stable. I am going to work Fallout 3 on high setting and observe what occurs. I upped it 5 by 5 and constantly applied subsequent to 5%. Nothing was occurring. I would start receiving apprehensive if it hits 75 or in excess of. In addition if you are working your fan at 100% to maintain the temps in then you have to verify do make a note of that the fan determine to poorly fail a lot earlier. They are not meant to work at 100%.

[Chandranath]

All right you were upping the Memory Clock to 421MHz at present. You have to cranked the fan up to 100% (via RivaTool) but if you cannot hear several differentiations. The Temperature which is at present at regarding 60 then the fan presently got louder and the temperature determine to down to 56/57 degrees with the ATITool 3DView working. After upping it you have to ran shortly a Artifact scan. You can observe no error but the Temperature is rising continuously. In this way you can prevent it.

[CACTUS101]

If you are getting moreover of these cards, is it for the reason that your power provider cannot handle the similar to of a 4850 or 4830. For the reason that if you have a 6-pin PCI-E connector on your PSU, the following determine to be fastidious for you. Be supposed to I purchase this Radeon HD4670 1GB for 118$ or be supposed to I try to get Palit Daytona GeForce 9600GT Sonic 1gb for 160$. You be supposed to install it yourself (no idea how). You have to see that the card should be suitable for it.