Picture settings with HDMI

[Walsh]

hi,
i have ViewSonic 17-inch TFT Display,the problem is while displaying a picture from an HDMI source,it restricts some of the picture settings,the sharpness and color saturation levels. i can change the preset picture settings when using component video or VGA but not with HDMI.What has happened and what is the solution?Can anyone help!!!

[kiLLer]

hi,
Adjust the output settings for TVs that support RGB full range. For RGB video signals, the range of color scale that is input varies depending on the TV in use. This setting is for use when the TV is connected to the system using an HDMI cable.
Limited RGB output signal is output in the range from 16 to 235. Full RGB output signal is output in the range from 0 to 255.
If black sometimes appears bright and sometimes appears pale on the screen when [Limited] is selected, set this option to [Full].
If black appears dull on the screen when [Full] is selected, set this option to [Limited].

[Team Leader]

Check the signals from your input box. They usually allow you to adjust the level of signal you can send, in figures ranging from 480i to 1080p. The higher the number, the greater the resolution will be.

[ApPy10]

Try this:
BACKLIGHT ---- 5
CONTRAST ---- 97
BRIGHTNESS ---- 43
COLOR ---- 54

COLOUR TEMPERATURE ---- WARM1
SHARPNESS ---- MIN (NONE)
NOISE REDUCTION ---- OFF

ADVANCED SETTINGS:

BLACK CORRECTOR ---- OFF
ADV. CONTRAST ENHANCER ---- OFF
GAMMA ---- LOW
CLEAR WHITE ---- OFF
COLOR SPACE ---- NORMAL
MPEG NOISE REDUTION ---- OFF