Results 1 to 7 of 7

Thread: How to use the USB port on the beetel Wifi 450TC1

  1. #1
    Join Date
    Jan 2014
    Posts
    5

    How to use the USB port on the beetel Wifi 450TC1

    Hi,

    I use the wifi and net on the beetel 450TC1. I found a USB provision on the router but there is no plug/port. If I go ahead and fix one, would I be able to use the usb point as NetUsb. I have a USB hub wired and intend to connect my router to it, so that I can access other USB devices I have, via the router's wifi connection.

  2. #2
    Join Date
    Nov 2009
    Posts
    557

    Re: How to use the USB port on the beetel Wifi 450TC1

    It looks to me that you are attempting to use a regular dsl modem or router with a 3g wifi device and you cannot do that am afraid. You will need a router that can work with the wifi dongle like Netgear 3G/4G Mobile Broadband Wireless-N Router or so.

  3. #3
    Join Date
    Jan 2014
    Posts
    5

    Re: How to use the USB port on the beetel Wifi 450TC1

    Hello,

    On the beetel 450TC1 is a USB provision. I want to know how would I be able to use the router, if I fixed a USB port. The router did not come with a port fixed but has a provision on the circuit board to fix one.

    Please help.
    Last edited by idsouza28; 20-01-2014 at 11:16 AM. Reason: correction

  4. #4
    Join Date
    Jul 2011
    Posts
    397

    Re: How to use the USB port on the beetel Wifi 450TC1

    The router has USB-B Port. As per the specification the router supports usb devices. Like a usb printer. You have to connect the same first and go in the router admin panel. Under usb just check if there is any device listed or not. If not then it means it is not compatible with the router. Devices will only work with this router if they are compatible. Try to find out the router manual. This will give you more detail information on its configuration.

  5. #5
    Join Date
    Jan 2014
    Posts
    5

    Re: How to use the USB port on the beetel Wifi 450TC1

    AliyaK,

    Thanks for your reply. The problem is, that, I cant get to the router's admin panel. The browser does not show me the router's login page after typing in 192.168.1.1. Infact pinging 192.168.1.1, gives no response. I do get ipaddresses for new devices connected. I can connect more than one device to the router. But cannot get to the 192.168.1.1 page. I checked the router circuit board again and it has the USB provision there. Needed to clarify from you, since you have mentioned USB-B, I think it should be a USB-A female point.

    Sadly, there are no connectors available in the market as I checked. I cannot say why. Its going to be hard to get one.

    The connection information on my computer I have is,

    Ip address: 192.168.1.2
    Broadcast address: 192.168.1.255
    Subnet Mask: 255.255.255.0
    Default route: 192.168.1.1
    Primary DNS: 192.168.1.1

  6. #6
    Join Date
    Jul 2011
    Posts
    397

    Re: How to use the USB port on the beetel Wifi 450TC1

    To find the IP address of your router you have to first find the default gateway. You can type ipconfig /all in cmd. This will give you the list of information to locate the IP address of router. 192.168.1.1 belongs to the modem and 192.168.2.1 is one of the most common router IP. Some uses 10.1.1.1. Just type ipconfig /all and check the ip under default gateway. Type that in your browser. The router will ask you login details. Admin/Admin is the most common user and password.

  7. #7
    Join Date
    Jan 2014
    Posts
    3

    Post Re: How to use the USB port on the beetel Wifi 450TC1

    Yes, I have used beetl USB and I have found, that model is wireless capable. Looks like you just need to activate it within the settings of the router.

    This is pretty localized question and you may find better help by calling you service provider.

Similar Threads

  1. Change wifi password of beetel 450tc1 Adsl Modem
    By Yudhaajit in forum India BroadBand
    Replies: 4
    Last Post: 25-06-2013, 10:25 AM
  2. Replies: 5
    Last Post: 06-09-2012, 01:20 PM
  3. How to use beetel 450TC1 adsl modem as WIFI router
    By ddj in forum Networking & Security
    Replies: 14
    Last Post: 27-03-2012, 07:47 AM
  4. Replies: 11
    Last Post: 10-12-2011, 12:06 AM
  5. Beetel 450TC1 ADSL2+ Router Port forwarding
    By Cheenu in forum Networking & Security
    Replies: 5
    Last Post: 31-07-2011, 07:08 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,711,655,457.29499 seconds with 17 queries