Want to Configure MTNL IPTV on Linksys

[Takshak]

I am using Linksys WRT54G Modem for MTNL Broadband. I have purchased IPTV from MTNL, but I am unable to configure the same on Linksys-WRT54G Modem, so as to use the USB Connection for Internet & Ethernet connection for MTNL IPTV.

[AniketS]

• clear TCP/IP settings from control panel-network connections-wireless and wired lan cards. Input following settings in the Wireless lan card .
• Turn on the printer first (make sure it is set to obtain IP address automatically from printer network settings in the printer itself.)
• Turn on TKD and reset it. Connect Printer with TKD wired router via ethernet cable in any 1 of the 4 ports.
• Turn on WRT54G and reset it.
• Access WRT54G settings by typing 198.168.1.1 in internet explorer.
• Connect TKD with WRT via ethernet cable from any LAN port of TKD to Internet port.

[Aadarsh]

In your modem settings page (192.168.1.1) you will already have a connection setup with vpi=0 vci=32 for the internet connection (in bridge mode since u r using usb). this connection is called 'pvc0'
to let your iptv box connect to the servers you will have to make another connection (pvc1) and enter the following values
vpi=0
vci =33
bridge mode
encapsulation = bridged LLC

--save and reboot the modem

--save and reboot the set top box.
if the set top box asks
then enter the following values--
for domain - iptv.com
username - ur phone no.
password - 12345678

[reju]

STB:
username = xxyyyyyyyy
password = 12345678

xx = std code (eg. 22 for Mumbai)
yyyyyyyy = 8 digit phone no.