as my friend suggested to make an purchase of OCZ Agility 3 , I made a buy and then found that it was really awesome. And I didn’t had any issues in my case as I had boot times under some couple of seconds. unluckily it came to my notice that it was giving me an 000000xF4 error on Win 7 BSOD's on me. I made some several attempts to reboot it, but after max 20 minutes of spam , BSOD again. I thought that re installation of Win 7 will work but a couple of times, still gave me the similar error all the way through the installation procedure.
I have made an reinstallation of Windows on my old 400gb hard drive as well as all works well as it should, but it tends to be just slower. A little investigation on the net regarding this topic lead to understand that the reason behind the BSOD was due to a malfunctioning firmware. In addition , I was also known that this issue was supposed to be fixed by the v2.15, version which I had installed ever since I received my unit.i am not having any any idea regarding this one a and I wonder if my unit is defective or else simply there's something I am doing incorrect. I later made some attempts to re-flash the firmware by means of the toolbox (3.02) but here also , there was no positive result. I am unable to see how secure erase could assist me with this issue . please assist me in my case and give some suggestions regarding the same.
Bookmarks