Go Back   TechArena Community > Hardware > Hardware Peripherals
Become a Member!
Forgot your username/password?
Register Tags Active Topics RSS Search Mark Forums Read

Sponsored Links



What to use between thermal paste or AS5 to use with corsair h70

Hardware Peripherals


Reply
 
Thread Tools Search this Thread
  #1  
Old 19-12-2010
Member
 
Join Date: Jul 2010
Posts: 71
What to use between thermal paste or AS5 to use with corsair h70
  

I have comprised and been reading a number of mixed evaluation were some people are saying by means of the intention of the stock thermal complex on the H70 is immediately as superior if not superior than AS5 and I encompass seen a lot by means of the intention of articulate the opposite. I am previously planning on utilizing AS5 additional than I required to observe if anybody had utilized together or immediately the stock, and is willing to contribute to their experience / opinion by means of me. I desirable, give the impression of being similar to I be able to confidently go by means of the stock thermal compound. I apologize in move forward I am innovative to this I had currently built my first build and I am working the constancy tests suggested in a step-by-step innovative discussion. On the other hand, when I run Prime95 it merely takes a minute or two for the entire core temps to reach mid 70's at which point I stopped up the test (Prime95 does not report several errors, to a certain extent I stop the test for the reason by means of the intention of I have read with the intention of letting temps get higher than this be able to damage the CPU).

Reply With Quote
  #2  
Old 19-12-2010
Member
 
Join Date: Nov 2009
Posts: 934
Re: What to use between thermal paste or AS5 to use with corsair h70

The idle temperature give the impression of being extremely well to me. I have not ran Prime95 at stock occurrence so I would not be familiar by means of the temperature beneath load so I determine to let the additional comment on by means of the intention of. Position the Vcore as exposed by CPU-Z at the same time as working with Prime. And in organize to hit DDR3-1600, you determine to necessitate to physically adjust the DRAM Frequency alternative to DDR3-1600MHz (x12 DRAM multiplier at a 133 BCLK). In addition physically adjust the four primary DRAM timings to 7-9-7-24, and the DRAM Voltage to no matter what your RAM is rated to run at. I had immediately installed a innovative H70 and opted to go away the thermal grease/paste layer by means of the intention of came by means of it.
Reply With Quote
  #3  
Old 19-12-2010
Member
 
Join Date: May 2009
Posts: 1,185
Re: What to use between thermal paste or AS5 to use with corsair h70

I am not familiar by means of water cooling, additional than your temps are extremely well. You in addition would not get a enormous dissimilarity in temps commencing from thermal compound alone. Seems similar to you encompass a attractive pleasant setup, enjoy it your temps seem similar to they are extremely well to me. What voltage are you working with at. Your temperatures give the impression of being superior, my friend has the H50 and its a small number of degrees higher on load than your own sitting in a P180 mini. Temp essentially give the impression of being actually superior, do you encompass the pump hooked up to a header by means of the intention of is set to run at full speed the entire the time. The Corsair Fans are mechanical by the CPU fan header. They are attractive deafening at full RPM so I utilized the resistor Corsair provided to diminish RPM (approximately 1600 I think).
Reply With Quote
  #4  
Old 19-12-2010
Member
 
Join Date: Apr 2009
Posts: 818
Re: What to use between thermal paste or AS5 to use with corsair h70

Glad to hear it. By means of anticipation here in the near prospect I determine to be capable to test the effectiveness of the pre-applied Tim to amazing similar to MX2. To observe if it performs as well as an aftermarket Tim material so to speak (in the middle of numerous additional things).I have comprised a Hyper 212 Plus and it is core contact so the grooves require to be filled by means of the thermal paste, this be able to be quite awkward and I originate the paste by means of the intention of came with the cooler to be quite superior for this I did endeavor a number of MX-3 too additional than by means of the intention of stuff dries out as you are positioning it on and you end up dragging it off as you are endeavoring to position it on, it was a frightening. I have comprised none of the paste by means of the intention of came by means of the cooler left at present so I necessitate something by means of the intention of determine to spread as nicely as by means of the intention of did and be immediately as superior if not better.
Reply With Quote
  #5  
Old 21-12-2010
Member
 
Join Date: Mar 2010
Posts: 515
Re: What to use between thermal paste or AS5 to use with corsair h70

Silver 5 is tranquil an extremely superior paste, economical and spreads well. Curing time is the most important drawback. Takes regarding 200 hrs. Of operation to arrive at full competence additional than even awaiting then itís certainly. The conductivity is actually not a tribulations unless you position way too much on so by means of the intention of it spills in excess of onto surrounding electrical components. By no means had a tribulations by means of with the intention of and I have comprised been utilizing it for years. I utilized MX2 previous to, itís real easy to position on, not so "dry" as MX3. Additional than I utilize AS5 the entire in excess of again, remember to utilize immediately diminutive , then np by means of conductivity. Is there no matter which superior than arctic silver 5 by means of the intention of might not be as practical additional than get you a degree or 3 if you immediately necessitate by means of the intention of diminutive extra push.
Reply With Quote
  #6  
Old 23-12-2010
Member
 
Join Date: Jul 2010
Posts: 90
Re: What to use between thermal paste or AS5 to use with corsair h70

Yes I fill the grooves and then position 3 thin strips of paste on, comparable to this direct here, they uses two additional than the Hyper 212+ has 4 get in touch by means of pipes so I utilize three strips. I hate to disagree by means of BMReviews additional than the most excellent method I have comprised and originate for heatpipe coolers is to position the thin lines right down the length of the heatpipes. Several additional pushes in the direction of the sides of the pipes filling in the gaps. The heatpipes are the most important source of heat elimination for individuals coolers so it's significant to maintain bubbles off the heatpipes. The grooves are actually voluminous on the 212+ and I imagine they do necessitate filling first. Positioning the paste on the heatpipes and expectant the extra to fill the grooves would not be most excellent by means of this cooler IMO. On the other hand I take QI's point regarding positioning the beads on the copper pipes to a certain extent than the aluminum.
Reply With Quote
Reply

  TechArena Community > Hardware > Hardware Peripherals
Tags: , , , ,



Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads for: "What to use between thermal paste or AS5 to use with corsair h70"
Thread Thread Starter Forum Replies Last Post
Which is better for cpu protection thermal pad or thermal paste Abhijoot Overclocking & Computer Modification 3 07-09-2013 07:14 PM
Corsair H100 CPU cooler Thermal paste Dvimida Hardware Peripherals 4 13-12-2011 08:14 AM
Thermal paste is not necessary? Foy Overclocking & Computer Modification 4 12-11-2009 10:50 PM
Thermal Paste for CPU and GPU GunFighter Overclocking & Computer Modification 4 01-04-2009 01:51 PM
Need help Changing thermal paste taher Overclocking & Computer Modification 1 14-03-2009 01:49 PM


All times are GMT +5.5. The time now is 05:40 AM.