Results 1 to 9 of 9

Thread: Intel DG45ID HDMI Timing, cannot set to 59hz

  1. #1
    Join Date
    Apr 2010
    Posts
    223

    Intel DG45ID HDMI Timing, cannot set to 59hz

    I own a sony TV which is not able to give an output of about 59 hertz for the LCD TV and thatís the reason why I am not able to access the TVís picture format options. However the NVidia, ATI, xbox, cablebox can help me to select multiple output formats but I am not able to achieve this because the motherboard lacks drivers. Moreover when I watch a blu-ray movie it is always treated as a PC output and hence I get a bad picture quality. so i wanted to know how to set the Intel DG45ID HDMI Timing.

  2. #2
    Join Date
    May 2006
    Posts
    2,340

    Re: Intel DG45ID HDMI Timing, cannot set to 59hz

    A number of problem occurs due to the EDID information and the control system. Actually this is meant to help you but it causes some issues. It would be beneficial to buy a device like gefenDVI detective if you are using your system for HDMI videos. Finally search for a display which works in such cases you can also copy the EDID info and lastly connect your desktop with your system. The desktop will never allow you to output anything the EDID info might have asked.

  3. #3
    Join Date
    Apr 2008
    Posts
    2,353

    Re: Intel DG45ID HDMI Timing, cannot set to 59hz

    Install the software in addition to FOLLOWING What You Already have (Purpose of It Is To confirm the Problem That Makes PowerDVD. Virtual CloneDrive (Freeware) Download Section 5.4.1.1 from Slysoft. And create an. ISO from your HDDVD / BD (Must Be AnyDVD HD running in background. ArcSoft Total Media Theatre (plays HDDVD / BD from. ISO) -> demo version is Sufficient for this task. If this works, Then You Have Confirmed That PowerDVD Create the disorder, AND THAT IS your system capable of playing HD / BD.

  4. #4
    Join Date
    Sep 2005
    Posts
    2,329

    ThumbsUp Re: Intel DG45ID HDMI Timing, cannot set to 59hz

    If you want to check how fast your system is in. general either you can try out. Haali Media Splitter (MatroskaSplitter_v1.8.122.18.exe or later) FFDShow (ffdshow_rev2253_20081026_clsid.exe or later). Then you can try to play HDDVD. Evo files and comics. M2ts files Directly from harddisk with Windows Media Player (or Better: first to convert 'em. Mkv gold. Ts format using the tools from forum.doom9.org). Playing HD movie files with ffdshow Requires a lot of computing power have Everything is decoded in software, could "Be a good purpose alternative to PowerDVD / ArcSoft.

  5. #5
    Join Date
    May 2008
    Posts
    1,818

    Re: Intel DG45ID HDMI Timing, cannot set to 59hz

    I suspect your graphics drivers powerdvd things are not the actual cause of the issues. ATi 2600XT on my Videocard, if I use "any later" Than Catalyst driver 8.4 (Have not tried 8.11), the PowerDVD BD advisor says the graphics driver IS non-compliant. Powerdvd will not play with non-compliant driver has, AnyDVD AnyDVD No gold.

  6. #6
    Join Date
    May 2008
    Posts
    1,825

    Re: Intel DG45ID HDMI Timing, cannot set to 59hz

    I don't think that this is associated with HDCP compliance. powerdvd Is Just Trying To Tell You That the graphics chip is handler, in general, to weak to play hd movies. remember There Are hd movies and hd movies. tv rips Have a low complexity and can Be Played back with "any Nearly graphics card. hd dvds and comics can Have a very high complexity Which CPU Is a No Match for And Then You need a good graphics card and no such poor onboard, Did You really think a tiny, little, weak, shared memory graphics chip would Be Enough For It.

  7. #7
    Join Date
    May 2006
    Posts
    2,819

    Re: Intel DG45ID HDMI Timing, cannot set to 59hz

    I feel that the problem of G45 comes as drivers and that software like PowerDVD does not yet take charge, which would be quite normal because it is rare that everything works perfectly with the output of a new chipset. Otherwise you need to install the PowerDVD version 5 only and a version after that. Hope that this will help you to achieve your objective.

  8. #8
    Join Date
    Nov 2005
    Posts
    2,503

    Re: Intel DG45ID HDMI Timing, cannot set to 59hz

    Well, it Seems something is strange about PowerDVD. Seems to Be Your setup good enough to play BD Without AnyDVD HD. Here Is a story. I Have Both PowerDVD 7.3 Ultra Media and ArcSoft Total Theater (TMT),. TMT plays Always BD Without AnyDVD HD. As for PowerDVD, version 4407 plays BD Without AnyDVD HD, 4617 objective the latest update will not play BD Without AnyDVD HD (it Gives me the message you got about Sami HDCP issue).

  9. #9
    Join Date
    Nov 2005
    Posts
    2,485

    Re: Intel DG45ID HDMI Timing, cannot set to 59hz

    I guess this problem is because of a video card and hence you should "get a video card. It Does not Have to Be a high-end card for BD playback. My Card Is a midrange Radeon HD 4670 1GB. It plays flawlessly BD Even Without AnyDVD HD running in the background. Even I can play UT3 at 1680 x 1050 w / max setting.

Similar Threads

  1. There is a kind of squeaking noise on Intel dg45id
    By Inaya in forum Motherboard Processor & RAM
    Replies: 5
    Last Post: 23-02-2011, 11:10 PM
  2. No improvement with new psu on my Intel DG45ID
    By Indivar in forum Hardware Peripherals
    Replies: 5
    Last Post: 19-12-2010, 09:59 PM
  3. Problem With Intel DG45ID Motherboard
    By Bhagwandas in forum Motherboard Processor & RAM
    Replies: 5
    Last Post: 05-10-2010, 03:22 PM
  4. Intel DG45ID with PCI 2.0
    By Jaabili in forum Motherboard Processor & RAM
    Replies: 7
    Last Post: 09-07-2010, 07:04 AM
  5. Intel DG45ID motherboard beeps once on boot.
    By Cayce in forum Motherboard Processor & RAM
    Replies: 4
    Last Post: 29-06-2010, 10:19 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •