Reset Ink levels for canon mx310

[Narragansett]

I am having an Canon MX310 printer which was showing the low ink and needs to change the cartridge so i have changed the cartridge. After installing the cartridge i am able to print the pages but it still showing the low ink. So can any one help me with the Reset Ink levels for canon mx310. A help may be appreciated. Thank you.

[Maxforu]

There are some steps involving in the resetting of the ink level in the Canon Printer which i am explaining here. Hope you will get it right. Just go through the below given step.

• Turn off the Canon printer.
• Now hold Stop/Reset and hold the power button for 5 sec
• Now keep holding the power button and release Stop/Reset button.
• Now Press two times Stop/Reset button
• Leave Power button
• Wait till you get the lights
• Now press the Stop/Reset button 3 time each having the 3 sec gap
• Now check whether you are getting the orange light or not.
• Now press Power button and enter the data
• Remove the Cartridge
• Leave it 20 sec
• Now Press the Power Button and shut down printer
• Start the printer
• Set the language and Country

Thats it !!!!!!!!

[deoWo]

As per your discussion i have come up with the a link which is having the solution for the resetting of the ink level in the Canon Mp460 that will work exactly in the same manner as canon mx310 will. So just go through the link and see whether it is working for your or not. Here is the link.
resetting ink levels of Canon Mp460

[Fabian]

I am having one solution for same which might work for your issue. Just insert the refilled cartridge in the printer. Then press and hold stop/reset button which is followed by the flashing of light for some time. Wait till the light stops. Now you will find that the ink level is reset and not showing the low ink level.

[Hardwareman]

If all the above solution is not working then it is advisable that you should install the driver for the printer once again and also check the connection of then printer that can be also the cause of the printer unable to detect the cartridge. So do the same and let me know that this is working for me or not.

[goatape]

I was having the same issue with the Canon printer which was not showing the ink level proper even after the installation of the new cartridge in the printer. The printer was working all fine but the ink level is always low. So i have finally contacted the Canon about this issue and they sorted out the problem by sending a technician. Try the same.

[Narragansett]

There are some steps involving in the resetting of the ink level in the Canon Printer which i am explaining here. Hope you will get it right. Just go through the below given step.

• Turn off the Canon printer.
• Now hold Stop/Reset and hold the power button for 5 sec
• Now keep holding the power button and release Stop/Reset button.
• Now Press two times Stop/Reset button
• Leave Power button
• Wait till you get the lights
• Now press the Stop/Reset button 3 time each having the 3 sec gap
• Now check whether you are getting the orange light or not.
• Now press Power button and enter the data
• Remove the Cartridge
• Leave it 20 sec
• Now Press the Power Button and shut down printer
• Start the printer
• Set the language and Country

Thats it !!!!!!!!

Thanks a lot for helping me out with this issue i have tried these things and got it working for me. It s little long method but i have achieved the same.