Go Back   TechArena Community > Hardware > Hardware Peripherals
Become a Member!
Forgot your username/password?
Register Tags Active Topics RSS Search Mark Forums Read

Sponsored Links



HP Officejet 7310 Error : Print cartridge alignment failed

Hardware Peripherals


Reply
 
Thread Tools Search this Thread
  #1  
Old 05-02-2010
Member
 
Join Date: Jul 2009
Posts: 154
HP Officejet 7310 Error : Print cartridge alignment failed
  

Hi,

I am having problems with my new ink cartridges on HP Officejet 7310 . I installed and then went through the process of adaptation and test page printed. The error message appears in the window that "Print cartridge alignment failed." I tried changing the cartridges, connect and disconnect the printer, etc. but issue not resolved. How should I remove Error : Print cartridge alignment failed ??

Reply With Quote
  #2  
Old 05-02-2010
Member
 
Join Date: May 2008
Posts: 279
Re: HP Officejet 7310 Error : Print cartridge alignment failed

Try Replacement of cartridges
  1. Carefully open the lid of the ink cartridges.
  2. Remove the ink cartridge that needs replacing, taking his thumb and forefinger and pull toward you.
  3. Remove the new cartridge from its packaging.
  4. Holding the cartridge at the groove with a color code, paste it into this slot. Firmly hold the cartridge, setting it in place.
  5. Close the print cartridges.
Reply With Quote
  #3  
Old 05-02-2010
Member
 
Join Date: May 2008
Posts: 980
Re: HP Officejet 7310 Error : Print cartridge alignment failed

If you use a computer on the platform of Windows, make sure that the network ports listed in device driver, consistent with its IP-address:
Print a network device configuration.
  1. On the Windows desktop, click Start, select Settings, then Printers or Printers and Faxes.-Or-Click Start, and then point to Control Panel, and Printers.
  2. Click the right mouse button on the device icon, select Properties, then click the Ports tab.? Select TCP / IP port for the device, and then click Configure Port.
  3. Compare the IP-address specified in the dialog box with the IP-address, which is listed on the page, network configuration, and verify their compliance. If the IP-addresses are different, change the IP-address in the dialog box on the page shown in the network configuration.
  4. Double-click OK, to save your changes and close the dialog boxes
.
Reply With Quote
  #4  
Old 05-02-2010
Member
 
Join Date: May 2008
Posts: 209
Re: HP Officejet 7310 Error : Print cartridge alignment failed

If you are on the network then try resetting the network device. You can do this by, press and hold the Power button, then click the Network (on some models may need to press the button Wireless) twice, then click Cancel three times and release the Power button. Click the Network button, and printing options for network configuration, make sure that the network settings are reset. Default SSID (network name) - "hpsetup", mode of communication - "ad hoc".
Reply With Quote
  #5  
Old 05-02-2010
Member
 
Join Date: Mar 2008
Posts: 672
Re: HP Officejet 7310 Error : Print cartridge alignment failed

To configure the alignment of the ink cartridges :
  1. Open the software Director of one of the following methods:
  2. From your desktop, double click on the icon of HP all-in-one.
  3. Click Start, Programs, then click the folder of HP all-in-one. Click HP Director.
  4. In Director, click Settings, then choose Maintenance.
  5. Click Align the print cartridges. A window containing information on aligning the print cartridges opens.
  6. Click Align. The unit begins the process of alignment and the display said that printing the alignment page will be launched.
  7. Check the alignment page when finished.
  8. Click OK to close the window alignment if all the tasks of alignment are checked green.
Reply With Quote
  #6  
Old 05-02-2010
Member
 
Join Date: May 2008
Posts: 816
Re: HP Officejet 7310 Error : Print cartridge alignment failed

Verify that the cartridge is not empty, including tanks of three different colors of the tricolor cartridge. If this is a new cartridge, make sure you have removed the protective strip of blue ink nozzles. Do not remove the copper flexible circuit with electrical contact points. If no band is present, try to reinsert the original cartridge and perform the alignment process before retesting the new cartridge.
Reply With Quote
Reply

  TechArena Community > Hardware > Hardware Peripherals
Tags: , , , ,



Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads for: "HP Officejet 7310 Error : Print cartridge alignment failed"
Thread Thread Starter Forum Replies Last Post
carriage jam error message in HP Officejet 7310 printer A-Shah Hardware Peripherals 6 25-05-2011 10:09 PM
HP Officejet J3680 cartridge error Nuryn Hardware Peripherals 4 06-05-2011 04:42 AM
HP Officejet j6410 not working properly due to cartridge error Jaiya Hardware Peripherals 6 03-05-2011 09:41 PM
HP OfficeJet 6500 will not print using black cartridge only Beloved Hardware Peripherals 5 09-09-2010 02:47 AM
HP Officejet 7310 software tkyle Vista Help 12 24-03-2007 08:02 PM


All times are GMT +5.5. The time now is 03:56 PM.