Activesync problem with bluetooth

[MAURO]

I want to synchronize my iPAQ PDA with bluetooth activesync. I spent much time looking for tutorials on the internet, but unfortunately I did not always happen. In fact I know that the synchronization is possible go to activesync and do:

• "File"
• "Connection Settings"
• Select the correct COM port

[PAIGE]

Follow the steps to solve your problem

• It must first connect the cable to create a profile in ActiveSync
• (if you do not you try and BT then suddenly one will not access the settings for ActiveSync)
• Delete your profile (File> Delete Partnership)
• Right-click the Bluetooth icon in the systray and click Advanced Configuration
• In the Local Services tab, double-click Bluetooth Serial Port
• Make sure the box is checked Autostart and note the COM port used
• Click Apply, Ok, and Ok
• Open ActiveSync, click on file and connection settings
• Check the box Allow serial cable connection and select the same COM port as that used for the serial port bluetooth
• Click Ok
• In the SPV, start ActiveSync, select Menu and then Setup BT ActiveSync
• Select Start -> Ok
• Make sure Bluetooth is On and then select Menu and Apparatus
• Select Menu then New
• Select the name of your PC
• Enter a password (1234) over the spv on your PC and then the name of your PC and select Done
• Click OK -> Finish
• Menu and select Connect via Bluetooth
• The wizard on the pc you to create a partnership: Always click Next.
• To disconnect right-click the Bluetooth icon and select Stop the Bluetooth device

[Kaydence]

Open a DOS command prompt (Start / Programs / Accessories, and type this:
C: \ devmgr_show_nonpresent_devices 1 =
C: \ devmgmt.msc
when the device manager opens, to display / show hidden devices

Then, to delete all COM ports (except com and printer) in the tree "PORTS". uninstall the bluetooth drivers and program management then restart the machine and reinstall the dongle itself.