PRoblem in SAMSUNG SV0411N Hard Disk Drive

[sagar2dumbre]

Sponsored Links

Hi...i have SAMSUNG SV0411N HDD it is giving some problem to me such as when i try to copy data from USB to HDD it is very slow ....and also my Windows XP also becomes slow ....it boots very slowly.....i m pasting here Test result using some software

HD Tune: SAMSUNG SV0411N Benchmark

Transfer Rate Minimum : 1.2 MB/sec
Transfer Rate Maximum : 1.7 MB/sec
Transfer Rate Average : 1.6 MB/sec
Access Time : 15.9 ms
Burst Rate : 1.6 MB/sec
CPU Usage : 98.6%

HD Tune: SAMSUNG SV0411N Information

Firmware version : UA100-08
Serial number : 0611J1FW880260
Capacity : 37.3 GB (~40.1 GB)
Buffer size : 2048 KB
Standard : ATA/ATAPI-7
Supported mode : UDMA Mode 5 (Ultra ATA/100)
Current mode : UDMA Mode 5 (Ultra ATA/100)

S.M.A.R.T : yes
48-bit Address : yes
Read Look-Ahead : yes
Write Cache : yes
Host Protected Area : yes
Device Configuration Overlay : yes
Automatic Acoustic Management: yes
Power Management : yes
Advanced Power Management : no
Power-up in Standby : no
Security Mode : yes
Firmware Upgradable : yes

ID Current Worst ThresholdData Status
(01) Raw Read Error Rate 100 100 51 0 Ok
(03) Spin Up Time 79 63 0 4096 Ok
(04) Start/Stop Count 79 79 0 21906 Ok
(05) Reallocated Sector Count 98 98 10 6 Ok
(07) Seek Error Rate 253 253 51 0 Ok
(08) Seek Time Performance 253 253 0 0 Ok
(09) Power On Hours Count 99 99 0 734524 Ok
(0A) Spin Retry Count 253 253 49 0 Ok
(0C) Power Cycle Count 88 88 0 12129 Ok
(C2) Temperature 142 85 0 32 Ok
(C3) Hardware ECC Recovered 100 100 0 60182908 Ok
(C4) Reallocated Event Count 99 99 0 4 Ok
(C5) Current Pending Sector 253 253 10 0 Ok
(C6) Offline Uncorrectable 100 100 10 1 Ok
(C7) Ultra DMA CRC Error Count 100 100 51 32 Ok
(C8) Write Error Rate 100 100 51 0 Ok
(C9) TA Counter Detected 100 100 51 0 Ok

----------------------------------

wht 2 do to repair my HDD ?

[sagar2dumbre]

no one is here ????

[Xylon]

Looks like you have old hard disk well you can try Hdd regenerater.HDD Regenerator is unique software program for regeneration of physically damaged hard disk drives. It does not hide bad sectors, it really restores them so you will get to know if there is any problem else try on another computer check its performance on that pc if same as your pc try to update firmware....

[SledgeHammer]

Use HDDScan/HDD Health & post results.

[sagar2dumbre]

In HDD Scan Software which test should i perform ????

[Xylon]

Start HDD Scan Software you can see two windows in first windows you can see your hdd name and two option smart and TASK click on task you wil get several option for checking disk first check with surface test ...

[deoWo]

Use Disk Repair Software 10.x : Disk Repair is a logical bad sector removal and repair software that removes the logical bad sectors and repairs " Track 0 Bad Disks ". Bad sectors are a major problem in hard disks, which are found to be mainly logical in nature.Disk Repair realigns the magnetic orientation to make each byte read and write able and hence perform the easy hard disk space recovery.