Lexmark x4580 Default Ip Settings

[Uriah]

Hello , i have a Lexmark x4580 , i Cannot Connect it properly and use it Wireless Function , The Wi-Fi indicator light gives information about the status of the printer , but i cannot Understand , also i have mess up with the internet protocol (ip) of the Printer , (this is may the Cause of problem ), so can you tell me How can i solve this issue thanks in advance

[Fabian]

This is the Factory Default Reset Procedure:

• First when the Printer in "Ready" mode.
• you have to Press Menu> to enter the menus.
• Keep pressing Menu> until you see Utilities Menu or Test Menu.
• Press Select* to view the list of menu items.
• Keep pressing Menu> until you see Factory Defaults on second line.
• Press Select. "=Restore" should be displayed on the second line.
• If not, press Menu> until "=Restore" is displayed.
• Press Select to restore the factory defaults.
• Reset complete.

[RoninBlade]

• Press and hold the Start and Stop buttons and turn on the printer.
• Hold the buttons down until “Performing Self Test” is displayed on the LCD.
• Release the buttons and “Configuration Menu” is displayed.
• Scroll to the RESTORE FACTORY DEFAULTS item on the menu and press select.
• Now scroll to RESTORE BASE and press select this sould reset your network card password. There is also a RESTORE NETWORK, this will erase the network configuration but will not reset the password.

[deoWo]

How to Reconfigure the Printer Network Adapter using the Wireless Setup Utility

The reconfiguration procedure is beneficial if one of the following has occurred or has been observed:
The printer's network settings have been reset to the factory defaults.
The wireless router or access point has been reset, and new or different wireless security values now exist.
The printer and printer software worked fine until recently, but now the printer is not communicating.

Check the Following Link For more Details
http://support.lexmark.com/perl/supp...ocid=enus26131