Kensington MouseWorks and Windows Vista
Hello, I know that you all might be aware of the fact that Kensington MouseWorks for Vista are not being developed. But there is a workaround for the MouseWorks 6.2.2 to work with Vista. Follow the methods below:
1. Extract MouseWorks_PC_622.exe using WinRAR or similar utility.
2. Burn the extracted folder to a CD, (not absolutely necessary but easier).
3. Insert CD and run setup.exe, restart when driver has finished installing, (leave CD installed).
4. After startup, Open device manager and under Human Interface Devices determine which USB port your mouse or trackball is connected to.
6. Select the driver tab, and select update driver, (select the CD if needed).
This will install the driver correctly and the MouseWorks software will now recognize the correct Kensington product that you are using.
This method may work with drivers for input devices other than Kensington as well.
Hope that helps.
xp1800 overclocked to 2.4ghz
an35n-400u mobo
256mb of adata ddr500
maxtor dimondmax8 40gb 7200rpm
geforce4 ti4400
52x32x52x16 cd-rw/dvd combo
Tt 420watt psu
Bookmarks