Results 1 to 3 of 3

Thread: Reprogramming the memory of a printer

  1. #1
    Join Date
    May 2008
    Posts
    191

    Reprogramming the memory of a printer

    Hi,

    My printer does not work, is a Canon PIXMA ip1600, whenever I try to print a message that says, remove the devices from scrap, the opening and retired, it got another, but was always giving that message.

    Someone told me he would have to reprogram the memory of the printer, how.

    Wait the answer, thank you very much.

  2. #2
    Join Date
    May 2008
    Posts
    816
    Well here I give you some guidelines to follow for solutions so that your printer is something that you hope will serve as general

    A) Reset and reset the ink by hand to the printer in the series (1000, 1200, 1300, 1600, and 1700 PIXMA of canon)

    1. Turn the printer off and disconnect the power cord. (Always connected the USB cable)
    2. Press and hold the POWER button, and connect the power cable.
    3. The indicator (LED) must be green.
    4. Press and release the RESUME button, the indicator (LED) should be orange.
    5. Press and release the RESUME button, the indicator (LED) must be green.
    6. Release the power button. "turn the head starts to move and win will recognize the printer"

    Note: for the printer 1500, the only difference from the previous steps will be to find the USB cable is disconnected.


    B) Reset the counters of ink or EPROM with the software of the series (1000-1200-1300-1600-1700 of CANON PIXMA):

    1) Download the software to reset the counters of ink or EPROM.
    2) Decompressing with winrar
    3) Double-click the file "general Tool"
    4) Click on the option USB port "just have to see an available port"
    5) Click on the button MAIN
    6) Click on the button PLATE
    7) Click on the button QUIT

    Note: For the case of the printer IP 1500, the difference is that before implementing the above steps must connect the USB cable.

    On the other hand they also can occur after running the software and manual reset as follows:

    So what we should do is this:

    1) Hold the button to add role for a minute, until you restart the counters of ink.
    2) when the head is moved for the first time, release the button to add paper, then when the head stops moving, re-pressing until you move again.
    Note: This will be done when the printer is usually switched on, just after we have made steps complete reset as outlined above.

    Well I hope this serves you.

  3. #3
    Join Date
    May 2008
    Posts
    191
    Hello,

    I am very grateful for the guidance you gave me, and that was the solution to the problem of the printer. Excuse abuse, but I have another printer Canon S200 also would like to reset the page but in the reset does not appear that model.

    thank you very much !!

Similar Threads

  1. Reprogramming bugged Westinghouse LVM-37w3se EDID chips
    By Tech^Geek in forum Monitor & Video Cards
    Replies: 4
    Last Post: 10-04-2012, 05:46 PM
  2. How to reset EB13 radio by reprogramming
    By KaIilAshhh in forum Portable Devices
    Replies: 3
    Last Post: 25-08-2011, 10:56 AM
  3. Reprogramming The various Files In LG VX8700
    By triop in forum Portable Devices
    Replies: 4
    Last Post: 02-02-2011, 09:57 PM
  4. "there is not enough memory to complete" with shared printer
    By Bruce Sanderson in forum Vista Help
    Replies: 2
    Last Post: 15-10-2009, 12:05 PM
  5. Cannot connect to XP Printer Share - error "Not Enough Memory"
    By Kaysel in forum Windows Vista Network
    Replies: 3
    Last Post: 06-01-2008, 07:19 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,711,673,351.17365 seconds with 17 queries