Go Back   TechArena Community > ARENA > Guides & Tutorials
Become a Member!
Forgot your username/password?
Register Tags Active Topics RSS Search Mark Forums Read

Sponsored Links



Migrating TCP Files from Tally 7.2 to Tally.ERP 9

Guides & Tutorials


Reply
 
Thread Tools Search this Thread
  #1  
Old 22-02-2011
Member
 
Join Date: May 2008
Posts: 432
Migrating TCP Files from Tally 7.2 to Tally.ERP 9
  

To migrate the TCP files from Tally 7.2 to Tally.ERP 9 follow the steps mentioned below:

1. Click Migrate TCP to commence migration of TCP files from Tally 7.2 to Tally.ERP 9


2. The Migration utility displays a message Migrate TCP(s) Yes or No


3. Accept to continue with the migration of TCP Files

4. On successfully migrating the TCP file from Tally 7.2 to Tally.ERP 9, a message is displayed shown below:


5. Press Enter to continues


Post Migration Observations for the TCP files


The migrated TCP file is saved in the same folder where Tally 7.2 TCP file resides.

The migrated TCP filename is suffixed with the digit 9 as shown and appears similarly in the Tally.ini.




Reply With Quote
  #2  
Old 23-04-2011
Member
 
Join Date: Feb 2011
Posts: 96
Re: Migrating TCP Files from Tally 7.2 to Tally.ERP 9

For more information on the same I want the users to click here and then get the detailed information of the issue is serious. And also you can check out the document where you will be able to refer the same to its better effect.
Attached Images
File Type: pdf Data Migration-Tally72 to TallyERP9.pdf (1.36 MB, 2 views)
Reply With Quote
  #3  
Old 24-04-2011
vruttimehta
 
Posts: n/a
Re: Migrating TCP Files from Tally 7.2 to Tally.ERP 9

Tally Admin Tool TheT allyAdmin tool is a new component that has been introduced with Tally.ERP 9 which enables the user to perform the following activities without starting Tally.ERP 9 • Initiate License Service operations. •Display the active Tally.ERP 9 License Servers in a LAN.
•Administer Site License for different products from Tally.ERP 9.
•Check network connections between the computers designated asClient andS er ver.
•ConvertTCP andT SF files of Tally 9 to the format compatible with Tally.ERP 9.
The Tally Admin Tool is available in the Tally.ERP 9 application folder, on installation. Introduction to TDL Server DLL Component Tally.ERP 9 onwards, a new component TDLServer.DLL has been introduced, which gets copied to the folder in which Tally.ERP 9 has been installed. All the default TDL files of Tally have been integrated in this compo- nent. On invoking Tally.ERP 9, these TDL’s will be loaded. The user TDL’s will be subsequently loaded as usual from Tally.ini. The componentization will result in a more robust application. The benefits of this componentization are as follows – •In case of any updates/ changes in TDL, only TDLServer.dll file needs to be downloaded and not the entire Tally application which enables faster downloads. •This will help in dynamic loading and unloading of TDL Files while Tally application is running •Forthcoming Tally Developer will be directly using this component, thus eliminating the need for a separate DefTDL.dat file. Unified File Format for Tally.ERP 9 The Tally.ERP 9 application folder contains files other than the data files. These are referred to as secondary files. From this release onwards the file format of all the secondary files have been standardized. TCP Files All the TDL files which were compiled for previous versions of Tally as.tcp have to be converted to a new for- mat. Mentioned below are the ways in which this can be done. Note: The TDL files intx t format does not require this conversion. Conversion of Tally 7.2 tcp files to Tally.ERP 9 Format Tally7.2 tcp files can be migrated to Tally.ERP 9 format using theTal ly7 2Mi gr atio n tool available in the Tal- ly.ERP 9 folder. Migration process is the same as earlier. Conversion of Tally 9 tcp files to Tally.ERP 9 Format •Automatic Conversion Process: When Tally.ERP 9 is installed in the existing Tally 9 folder then all the files with.tcp extension included in the “tally.ini” file are automatically converted to the Tally.ERP 9 compatible format. The original “.tcp” file is renamed as “<filename>.tcp.BAK”. The name of the file which is converted to new format is same as the original filename. The original TCP file is retained as a backup file. •Manual Conversion Process: To manually convert the files in the new format use theC o nv ersi on tab of Tally Admin Tool
Reply With Quote
Reply

  TechArena Community > ARENA > Guides & Tutorials
Tags: , , , ,



Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads for: "Migrating TCP Files from Tally 7.2 to Tally.ERP 9"
Thread Thread Starter Forum Replies Last Post
how to run tally on linux Nuru's Windows Software 5 13-04-2012 07:57 PM
Migrating TDS Data for Tally.ERP 9 spookshow Guides & Tutorials 1 23-04-2011 12:11 PM
How to Migrate TCP Files from Tally 9 to Tally.ERP 9 Format spookshow Guides & Tutorials 1 22-02-2011 11:27 AM
How to Migrate Tally 7.2 data to Tally.ERP 9 fumble Guides & Tutorials 1 22-02-2011 10:10 AM
Help to run tally on Windows XP Terrextre Windows Software 5 06-09-2008 10:28 PM


All times are GMT +5.5. The time now is 09:33 AM.