

 Thread Tools  Search this Thread 
#1
 
 
SRMEEE 2009SRM Engineering Entrance Examination Test paper solution hi i have applied for SRMEEE 2009SRM Engineering Entrance Examination Test before Last date for receipt of applications now the entrance Examination is on 03 May 2009 so i am looking for its past paper or sample paper and solution .if any one have please provide me thank you. 
#2
 
 
Re: SRMEEE 2009SRM Engineering Entrance Examination Test paper solution Pattern of Question paper for B.Tech Program Part 1: Physics 35 questions with a total weightage of 105 marks. Part 2: Chemistry 35 questions with a total weightage of 105 marks. Part 3: Mathematics 35 questions with a total weightage of 105 marks. Part 4: Biology 50 questions with a total weightage of 105 marks. Negative mark of 1 for every wrong answer in physics, chemistry & mathematics and 0.7 for every wrong answer in biology Total Weightage 315 marks. Note: Part 1 and Part 2 are compulsory for all candidates. download here test paper and solution 
#3
 
 
Re: SRMEEE 2009SRM Engineering Entrance Examination Test paper solution SRMEEE btech paper download 
#4
 
 
Re: SRMEEE 2009SRM Engineering Entrance Examination Test paper solution SRMEEE 2009  Entrance Examination for B.TECH, M.TECH, MBA/PGPM, MCA programs is on May 3, 2009, Sunday, Between 10.00 am and 12.30 pm. 
#5
 
 
Re: SRMEEE 2009SRM Engineering Entrance Examination Test paper solution wat type of syllabus covered in srm entrance examination? 
#6
 
 
SRMEEE Mathematics Syllabus 2009 SRMEEE Mathematics Syllabus 2009 Part 3  Mathematics (35 Questions) Unit 1: Sets, Relations and Functions Sets and their representations, union, intersection and complements of sets and their algebraic properties, relations, equivalence relations, mappings, oneone, into and onto mappings, composition of mappings. Unit 2: Complex Numbers Complex numbers in the form a+ib and their representation in a plane Argand diagram. Algebra of complex numbers, modulus and argument (or amplitude) of a complex number, square root of a complex number. Cube roots of unity, triangle inequality. Unit 3: Matrices and Determinants Determinants and matrices of order two and three, properties of determinants, evaluation of determinants. Addition and multiplication of matrices, adjoint and inverse of matrix. Unit 4: Applications of Matrices and Determinants Computing the rank of a matrixtest of consistency and solution of simultaneous linear equations using determinants and matrices. Unit 5: Quadratic Equations Quadratic equations in real and complex number system and their solutions. Relation between roots and coefficients, nature of roots, formation of quadratic equations with given roots; symmetric functions of roots, equations reducible to quadratic equations. Unit 6: Permutations and Combinations Fundamental principle of counting: permutation as an arrangement and combination as selection, meaning of P(n,r) and C(n,r). Simple applications. Unit 7: Mathematical Induction and its Applications Stating and interpreting the principle of mathematical induction. Using it to prove formula and facts. Unit 8: Binomial theorem and its Applications Binomial theorem for a positive integral index; general term and middle term; Binomial theorem for any index. Properties of binomial coefficients. Simple applications for approximations. Unit 9: Sequences and Series Arithmetic, geometric and harmonic progressions. Insertion of arithmetic, geometric and harmonic means between two given numbers. Relation between A.M., G.M. and H.M. arithmetic, geometric series, exponential and logarithmic series. Unit 10: Differential Calculus Polynomials, rational, trigonometric, logarithmic and exponential functions. Inverse functions. Graphs of simple functions. Limits, continuity, differentiation of the sum, difference, product and quotient of two functions, differentiation of trignometic, inverse trigonometric, logarithmic, exponential, composite and implicit functions, derivatives of order up to two. Unit 11: Applications of Differential Calculus Rate of change of quantities, monotonicincreasing and decreasing functions, maxima and minima of functions of one variable, tangents and normals, Rolle's and Lagrange's mean value theorems. Unit 12: Integral Calculus Integral as an antiderivative. Fundamental integrals involving algebraic, trigonometric, exponential and logarithmic functions. Integration by substitution, by parts and by partial fractions. Integration using trigonometric identities. Integral as limit of a sum. Properties of definite integrals. Evaluation of definite integrals; Determining areas of the regions bounded by simple curves. Unit 13: Differential Equations Ordinary differential equations, their order and degree. Formation of differential equations. Solution of differential equations by the method of separation of variables. Solution of homogeneous and linear differential equations and those of the type d2y / dx2 = f(x). Unit 14: Straight Lines in Two Dimensions Cartesian system of rectangular coordinates in plane, distance formula, area of a triangle, condition for the collinearity of three points and section formula, centroid and incentre of a triangle, locus and its equation, translation of axes, slope of a line, parallel and perpendicular lines, intercepts of a line on the coordinate axes. Various forms of equations of a line, intersection of lines, angles between two lines, conditions for concurrence of three lines, distance of a point from a line. Equations of internal and external bisectors of angles between two lines, coordinates of centroid, orthocentre and circumcentre of a triangle, equation of family of lines passing through the point of intersection of two lines, homogeneous equation of second degree in x and y, angle between pair of lines through the origin, combined equation of the bisectors of the angles between a pair of lines, condition for the general second degree equation to represent a pair of lines, point of intersection and angle between two lines. Unit 15: Circles in Two Dimensions Standard form of equation of a circle, general form of the equation of a circle, its radius and centre, equation of a circle in the parametric form, equation of a circle when the end points of a diameter are given, points of intersection of a line and a circle with the centre at the origin and condition for a line to be tangent to the circle, length of the tangent, equation of the tangent, equation of a family of circles through the intersection of two circles, condition for two intersecting circles to be orthogonal. Unit 16: Conic Sections in two Dimensions Sections of cones, equations of conic sections (parabola, ellipse and hyperbola) in standard form, condition for y = mx+c to be a tangent and point(s) of tangency. Unit 17: Vector Algebra Vectors and scalars, addition of vectors, components of a vector in two dimensions and three dimensional space, scalar and vector products, scalar and vector triple product. Application of vectors to plane geometry. Unit 18: Measures of Central Tendency and Dispersion Calculation of mean, median and mode of grouped and ungrouped data. Calculation of standard deviation, variance and mean deviation for grouped and ungrouped data. Unit 19: Probability Probability of an event, addition and multiplication theorems of probability and their applications; Conditional probability; Baye's theorem, probability distribution of a random variate; binomial and poisson distributions and their properties. Unit 20: Trignometry Trignometrical identities and equations. Inverse trigonometric functions and their properties. Properties of triangles, including, incentre,circumcentre and orthocenter, solution of triangles. 
#7
 
 
SRMEEE Physics Syllabus 2009 SRMEEE Physics Syllabus 2009 Part 1  Physics (35 Questions) Unit 1: Units and Measurement Units for measurement, system of unitsS.I., fundamental and derived units, measurementserrors in measurementsignificant figuresdimensions dimensional analysisapplications. Unit 2: Mechanics Motion in one dimensionuniform and nonuniform motionuniformly accelerated motionscalar and vector quantitiesNewton's laws of motionforce and inertiaimpulse and momentumlaw of conservation of linear momentumapplicationsmotions in two dimension  projectile motion. Uniform circular motioncentripetal forcecentre of masstorqueangular momentum and its conservationmoment of inertiatheorems of moment of inertiaworkenergypotential energy and kinetic energypower  collisionelastic and inelastic collisions. Unit 3: Gravitation, Mechanics of Solids and Fluids the universal law of gravitation, acceleration due to gravityvariation of'g' with altitude, latitude and depthgravitation potentialescape velocity and orbital velocitygeostationary satellites. Solidselastic behaviour, stressstrainHooke's lawModulli of elasticityrelation between themsurface tensioncapillarityapplicationsviscosityPoiseuille's formula  Stokes lawapplicationsBernoulli's theorem applications. Unit 4: Oscillations and Wave Motion Periodic motionsimple harmonic motionequations of motionoscillations of springsimple pendulumfree, forced and damped oscillationsresonanceapplicationswave motionslongitudinal and transverse wavesvelocity of wave motion in different mediaNewton's formulaLaplace's correctionsuper position of wavesprogressive and standing wavessonometerair columnsDoppler effect and its applications. Unit 5: Heat and Thermodynamics Kinetic theory of gasespostulatespressure of a gasspecific heat capacityrelation between Cp and Cvfirst law of thermodynamicsthermodynamical processesisothermal and adiabaticreversible and irreversible processsecond law of thermodynamicsCarnot's engine  Heat transferconductionconvectionradiationthermal conductivity of solidsblack body radiationsKirchoff's lawWien's displacement lawStefan's lawNewton's law of cooling. Unit 6: Ray and Wave Optics and Magnetism Reflection and refraction of lighttotal internal reflectionvelocity of light determinationdeviation and dispersion of light by a prismwave nature of lightinterferenceYoung's double slit experimentdiffraction and polarization. Earth's magnetic field and magnetic elementsmagnetic field due to a magnetic dipoletorque on a magnetic dipoletangent lawtangent galvanometerdeflection magnetometermagnetic properties of a materialdia, para and ferromagnetic materialsapplications. Unit 7: Electrostatics and Electromagnetism ElectrostaticsCoulomb's inverse square lawdielectric constantelectric fieldelectric lines of forceelectric dipoleelectric potentialpotential differenceelectric fluxGauss theoremelectrostatic inductioncapacitorcapacitors in parallel and seriesaction of pointslightning arrestorelectric currentdrift velocity of electronsOhm's lawelectrical resistivity and conductivitysuper conductivityKirchoff's lawWheatstone's bridgeprinciple of potentiometerelectric powermagnetic effects of electric currentBio Savart lawforce on a moving charge in an uniform magnetic fieldmoving coil galvanometerconversion of a galvanometer into voltmeter and ammeterFaraday's lawLenz law of electromagnetic inductionSelf inductancemutual inductanceFlemming's right hand rulemethods of inducing emfeddy current. Unit 8: Atomic Physics and Relativity Atomic structureproperties of cathode rays and positive raysspecific charge of an electronatom modelThomson atom modelRutherford atom modelBohr atom modelmerits and demeritsquantum numbersXraysproductionpropertiesBragg's lawBragg's Xray spectrometerPhotoelectric effectlaserspontaneous and stimulated emissionlaser actioncharacteristics of laser lightruby laserapplications of laserrelativityEinstein's mass energy relationvariation of mass with velocity. Unit 9: Dual Nature of Matter and Nuclear Physics Matter waveswave nature of particlesDe Broglie wavelengthelectron microscope. Nuclear properties; radius, mass, binding energy, density,isotopes, mass defect Bainbridge mass spectrometernuclear forcesneutron discoveryradioactivitya, b and g decayhalf life and mean lifeartificial radio activityradio isotopesradio carbon datingradiation hazards. Nuclear fissionnuclear reactornuclear fusionhydrogen bombcosmic rayselementary particles. Unit 10: Electronics and Communication SemiconductorsdopingtypesPN junction diodebiasingdiode as a rectifiertransistorstransistor characteristicsamplifiergainfeedback in amplifierslogic gatesbasic logic gatesNOT, OR, AND, NOR, NANDuniversal gatesDe Morgan's theoremsspace communicationpropagation of electromagnetic waves in atmospheresky and space wave propagationmodulation typesdemodulationmicrowavesradars. 
#8
 
 
SRMEEE Chemistry Syllabus 2009 SRMEEE Chemistry Syllabus 2009 Part 2  Chemistry Unit 1: Some Basic Concepts in Chemistry Matter and its nature, Dalton's atomic theory; concept of atom, molecule, element and compound; physical quantities and their measurements in chemistry, precision and accuracy, significant figures, S.I. Units, dimensional analysis; laws of chemical combination; atomic and molecular masses, mole concept, molar mass, percentage composition, empirical and molecular formulae; chemical equations and stoichiometry. Unit 2: States of Matter Classification of matter into solid, liquid and gaseous states. Solid State: Classification of solids: molecular, ionic, covalent and metallic solids, amorphous and crystalline solids (elementary idea); Bragg's Law and its applications; unit cell and lattices, packing in solids (fcc, bcc and hcp lattices), voids, calculations involving unit cell parameters, imperfection in solids; electrical, magnetic and dielectric properties. Liquid State: Properties of liquids  vapour pressure, viscosity and surface tension and effect of temperature on them (qualitative treatment only). Gaseous State: Measurable properties of gases; Gas lawsBoyle's law,Charle's law, Graham's law of diffusion, Avogadro's law, Dalton's law of partial pressure; concept of absolute scale of temperature; ideal gas equation, kinetic theory of gases (only postulates); concept of average, root mean square and most probable velocities; real gases, deviation from ideal behaviour, compressibility factor, Van der Waals equation, liquefaction of gases, critical constants. Unit 3: Chemical FamiliesPeriodic Properties Modern periodic law and present form of the periodic table, s & p block elements, periodic trends in properties of elements, atomic and ionic radii, ionization enthalpy, electron gain enthalpy, valence, oxidation states and chemical reactivity. Transition elementsdblock elements, inner transition elementsfblock elements. Periodic trends in propertiesionization energy, electron affinity atomic radii, ionic radii and periodicity, lanthanides and actinidesgeneral characteristics. Coordination Chemistry: Coordination compounds, nomenclature: terminology  Werner's coordination theory. Applications of coordination compounds. Unit 4: Atomic Structure Discovery of subatomic particles (electron, proton and neutron); Thomson and Rutherford atomic models and their limitations; nature of electromagnetic radiation, photoelectric effect; spectrum of hydrogen atom, Bohr model of hydrogen atomits postulates, derivation of the relations for energy of the electron and radii of the different orbits,limitations of Bohr's model; dual nature of matter, DeBroglie's relationship, Heisenberg uncertainty principle. Elementary ideas of quantum mechanics, quantum mechanical model of atom, its important features, and 2, concept of atomic orbitals as one electron wave functions; Variation of and 2 with r for 1s and 2s orbitals; various quantum numbers (principal, angular momentum and magnetic quantum numbers) and their significance; shapes of s, p and dorbitals, electron spin and spin quantum number; rules for filling electrons in orbitalsAufbau principle, Pauli's exclusion principle and Hund's rule, electronic configuration of elements, extra stability of halffilled and completely filled orbitals. Unit 5: Chemical Bonding and Molecular Structure Covalent bonding: Concept of electronegativity, Fajan's rule, dipole moment; Valence Shell Electron Pair Repulsion (VSEPR) theory and shapes of simple molecules. Quantum mechanical approach to covalent bonding: Valence bond theoryIts important features, concept of hybridization involving s, p andd orbitals; resonance. Molecular orbital theoryIts important features, LCAOs, types of molecular orbitals (bonding, antibonding), sigma and pibonds, molecular orbital electronic configurations of homonuclear diatomic molecules, concept of bond order, bond length and bond energy. Elementary idea of metallic bonding. Hydrogen bonding and its applications. Unit 6: Chemical Energetics Energy changes during a chemical reaction, internal energy and enthalpy, internal energy and enthalpy changes, origin of enthalpy change in a reaction, Hess's law of constant heat summation, numerical, based on these concepts. Enthalpies of reactions (enthalpy of neutralization, enthalpy of combustion, enthalpy of fusion and vaporization). Unit 7: Chemical Thermodynamics First law of thermodynamicsConcept of work, heat internal energy and enthalpy, heat capacity, molar heat capacity; Hess's law of constant heat summation; enthalpies of bond dissociation, combustion, formation, atomization, sublimation, phase transition, hydration, ionization and solution. Second law of thermodynamicsSpontaneity of processes; DS of the universe and DG of the system as criteria for spontaneity, DGo (Standard Gibbs energy change) and equilibrium constant. Unit 8: Solutions Different methods for expressing concentration of solutionMolality, molarity, mole fraction, percentage (by volume and mass both), vapour pressure of solutions and Raoult's lawideal and nonideal solutions, vapour pressurecomposition, plots for ideal and nonideal solutions; colligative properties of dilute solutionsrelative lowering of vapour pressure, depression of freezing point, elevation of boiling point and osmotic pressure; determination of molecular mass using colligative properties; abnormal value of molar mass, Van't Hoff factor and its significance. Unit 9: Chemical Equilibrium Meaning of equilibrium, concept of dynamic equilibrium. Equilibria involving physical processes: Solidliquid, liquidgas and solidgas equilibria, Henry's law, general characterics of equilibrium involving physical processes. Equilibria involving chemical processes: Law of chemical equilibrium, equilibrium constants (Kp and Kc) and their significance, significance of DG and DGo in chemical equilibria, factors affecting equilibrium concentration, pressure, temperature, effect of catalyst; Le Chatelier's principle. Ionic equilibrium: Weak and strong electrolytes, ionization of electrolytes, various concepts of acids and bases (Arrhenius, BrOnstedLowry and Lewis) and their ionization, acidbase equilibria (including multistage ionization) and ionization constants, ionization of water, pH scale, common ion effect, hydrolysis of salts and pH of their solutions, solubility of sparingly soluble salts and solubility products, buffer solutions. Unit 10: Electrochemistry Electrolytic and metallic conduction, conductance in electrolytic solutions, specific and molar conductivities and their variation with concentration: Kohlrausch's law and its applications. Electrochemical cellsElectrolytic and Galvanic cells, different types of electrodes, electrode potentials including standard electrode potential, halfcell and cell reactions, emf of a galvanic cell and its measurement; Nernst equation and its applications; relationship between cell potential and Gibbs' energy change; dry cell and lead accumulator; fuel cells; corrosion and its prevention. Unit 11: Surface Chemistry, Chemical Kinetics and Catalysis AdsorptionPhysisorption and chemisorption and their characteristics, factors affecting adsorption of gases on solidsFreundlich and Langmuir adsorption isotherms, adsorption from solutions. CatalysisHomogeneous and heterogeneous, activity and selectivity of solid catalysts, enzyme catalysis and its mechanism. Collidal stateDistinction among true solutions, colloids and suspensions, classification of colloidslyophilic, lyophobic; multi molecular, macromolecular and associated colloids (micelles), preparation and properties of colloidsTyndall effect, Brownian movement, electrophoresis, dialysis, coagulation and flocculation; emulsions and their characteristics. Rate of reaction, instantaneous rate of reaction and order of reaction. Factors affecting rates of reactionsfactors affecting rate of collisions encountered between the reactant molecules, effect of temperature on the reaction rate, concept of activation energy, catalyst. Rate law expression. Order of a reaction (with suitable examples). Units of rates and specific rate constants. Order of reaction and effect of concentration (study will be confined to first order only). Theories of catalysisadsorption theorysome of important industrial process using catalysts. Unit 12: Purification and Characterisation of Organic Compounds PurificationCrystallization, sublimation, distillation, differentialextraction and chromatographyprinciples and their applications. Qualitative analysisDetection of nitrogen, sulphur, phosphorus and halogens. Quantitative analysis (basic principles only)Estimation of carbon, hydrogen, nitrogen, halogens, sulphur, phosphorus. Calculations of empirical formulae and molecular formulae; numerical problems in organic quantitative analysis. Unit 13: Some Basic Principles of Organic Chemistry Tetravalency of carbon; shapes of simple moleculeshybridization (s and p); classification of organic compounds based on functional groups: C=C,C?C and those containing halogens, oxygen, nitrogen and sulphur; homologous series; isomerismstructural and stereoisomerism. Nomenclature (Trivial and IUPAC) Covalent bond fission Homolytic and heterolytic: free radicals, carbocations and carbanions; stability of carbocations and free radicals, electrophiles and nucleophiles. Electronic displacement in a covalent bondinductive effect, electromeric effect, resonance and hyperconjugation. Common types of organic reactions Substitution, addition, elimination and rearrangement. Unit 14: Hydrocarbons Classification, isomerism, IUPAC nomenclature, general methods of preparation, properties and reactions. AlkanesConformations: Sawhorse and Newman projections (of ethane); mechanism of halogenation of alkanes. AlkenesGeometrical isomerism; mechanism of electrophilic addition: addition of hydrogen, halogens, water, hydrogen halides (Markownikoff's and peroxide effect); ozonolysis, oxidation, and polymerization. AlkynesAcidic character; addition of hydrogen, halogens, water and hydrogen halides; polymerization. Aromatic hydrocarbons  nomenclature, benzenestructure and aromaticity; mechanism of electrophilic substitution: halogenation, nitration, FriedelCraft's alkylation and acylation, directive influence of functional group in monosubstituted benzene. Unit 15: Organic Compounds Containing Oxygen General methods of preparation, properties, reactions and uses. Alcohols: Identification of primary, secondary and tertiary alcohols; mechanism of dehydration. Phenols: Acidic nature, electrophilic substitution reactions: halogenation, nitration and sulphonation, ReimerTiemann reaction. Addition to >C=O group, relative reactivities of aldehydes and ketones Ethers: Structure. Aldehyde and Ketones: Nature of carbonyl group; NucleophilicNucleophilic addition reactions (addition of HCN, NH3 and itsClemmensen); acidity ofhydrogen, aldol condensation, Cannizzaro reaction, Haloform reaction; Chemical tests to distinguish between aldehydes and Ketones. Carboxylic acids: Acidic strength and factors affecting it. Unit 16: Organic Compounds Containing Nitrogen General methods of preparation, properties, reactions and uses. Amines: Nomenclature, classification, structure, basic character and identification of primary, secondary and tertiary amines and their basic character. Diazonium salts: Importance in synthetic organic chemistry. Unit 17: Polymers General introduction and classification of polymers, general methods of polymerizationaddition and condensation, copolymerization; natural and synthetic rubber and vulcanization; some important polymers with emphasis on their monomers and uses  polythene, nylon, polyester and bakelite. Unit 18: Bio Molecules CarbohydratesClassification: aldoses and ketoses; monosaccharides (glucose and fructose), constituent monosaccharides of oligosacchorides (sucrose, lactose, maltose) and polysaccharides (starch, cellulose, glycogen). ProteinsElementary Idea ofamino acids, peptide bond, polypeptides; proteins: primary, secondary, tertiary and quaternary structure (qualitative idea only), denaturation of proteins, enzymes. VitaminsClassification and functions. Nucleic acidsChemical constitution of DNA and RNA. Biological functions of nucleic acids. Unit 19: Chemistry in Everyday Life Chemicals in medicines Analgesics, tranquilizers, antiseptics, disinfectants, antimicrobials, antifertility drugs, antibiotics, antacids. Antihistaminstheir meaning and common examples. Chemicals in foodpreservatives, artificial sweetening agentscommon examples. Cleansing agentsSoaps and detergents, cleansing action. 
#9
 
 
SRMEEE Biology Syllabus 2009 SRMEEE Biology Syllabus 2009 Part 4: Biology Botany Unit I: Taxonomy of Angiosperm Types of classifications Artificial, Natural, Phylogenetic  Biosystematics  Binomial Nomenclature  Herbaria and their uses  Bentham and Hooker's classification of plants  Families Malvaceae, Solanaceae  Euphorbiaceae, Musaceae and Economic Importance. Unit II: Plant Anatomy Tissues and Tissue System  anatomy of monocot and Dicot roots  anatomy of Monocot and dicot stem and anatomy of dicot leaf. Unit III: Cell Biology and Genetics Chromosomes  Structure and types  genes and genome  Linkage and crossing over  Gene mapping  recombination of chromosomes  mutation  chromosomal aberration  DNA as genetical material  Structure of DNA  replication of DNA  Structure of RNA and its type. Unit IV: Biotechnology Recombinant DNA Technology  Transgenic plants and microbes  plant tissue culture and its application  Protoplasmic fusion  single cell protein. Unit V: Plant Physiology Photosynthesis  Significance  site of photosynthesis  photochemical and biosynthetic phases  electron transport system  cyclic and non cyclic photophosphorylation  C3 and C4 pathway  photorespiration  factor affecting photosynthesis  mode of nutrition  autotrophic  heterotropic  saprophytic  parasitic and insectivorous plants  chemosynthesis  respiration  mechanism of glycolysis  kreb'scycle  pentose pathway  anaerobic respiration  respiratory quotient  compensation point  fermentation  plant growth  growth regulators  phytohormones  auxin  gibberellins  cytokinins  ethylene and abscisic acid  photoperiodism and vernalisation. Unit VI: Biology in Human Welfare Food production  breeding experiments  improved varieties and role of biofertilizer  crop diseases and their control  biopesticides  genetically modified food  biowar  biopiracy  biopatent  sustained agriculture and medicinal plants including microbes  Economic importance food yielding (rice)  Oil yielding (groundnut) fibre yielding (cotton) and timber yielding (teak) Zoology Unit I: Human Physiology Nutrition  introduction  carbohydrates  proteins  lipids  vitamins mineral  water  Balanced diet  calorie value  (ICBM standard ) obesity  Hyperglycemia  hypoglycemia  malnutrition. Digestion  enzymes and enzyme action  Brief account of following  Dental caries  Root canal therapy  peptic ulcerHerniaAppendicitis  Gallbladder stone  Liver cirrhosis  Hepatitis. Bones and Joints (Major types) fractures  Dislocations  Arthritis  Rickets and Osteomalasia  orthopaedies  Gout. Muscles  muscle action  muscle tone  Rigor Mortis  muscle pull (hernia) isometric and aerobic exercises (body building) myasthenia gravis. Respiration  Process of pulmonary respiration  inspiration Expiration  Exchange of gases at alveolar level  control of respiration  pneumonia  pleurisy  Tuberculosis  Bronchitis  Breathing exercise. Circulation  Functioning of heart origin and conduction of heart beat  Artificial pacemaker  coronary blood vessels and its significance  myocardial infraction  Angina pectoria  Angiogram  angioplasty and coronary bypass surgery  Atherosclerosis  heart attack  heart block  ECG and Echo Cardiographyheart valvesRheumatic heart disease (RHD) ICCUarterial and venous systemsBlood pressurepulse rateheart transplantation Resuscitation in heart attack (First aid) Blood componentsfunctions plasmacorpusclesblood clottinganticoagulantsThrombosisembolism blood related diseases like polycythemiaLeukemiaLymph fluid. Physiological Co ordination System: Brainfunctioning of different regionsmemorysleepstrokeAlzheimer's diseasemeningitisBrain feverconditioned reflexelectroencephalographyRight brain left brain conceptspinal cordfunctioningreflex actionCSFchemical coordinationpituitary (Hormones of adenohypophysis and their regulation) Thyroidparathyroid hormonesinsulin and glucogonHormones of adrenal cortex and medullaReproductive hormonesproblems related to secretion, non secretion of hormones. Receptor Organs: EyeFocussing mechanism and photo chemistry of retinashort sightednessLongsightednessOptometryRetinopathy cataract Lens replacement NectalopiaEye infectionconjunctivitiesGlucuoma Eye careEarHearing mechanismorgan of cortiHearing impairments and aids Noise pollution and its importanceskinmelanin functions Effect of solar radiation/UV Skin graftingDermatitisTongueGustatory reception. Excretion: UreotelismureaBiosynthesis(ornithine cycle) Nephron ultrafiltrationtubular reabsorption and tubular secretionRenal failureDialysis kidney stone formation kidney transplantationDiabetes. Reproductive System: Brief account of spermatogenesis and oogenesismenstrual cyclein vitro fertilizationBirth control Unit II: Microbiology IntroductionHistory of medical microbiologyThe influence of Pasteur, Koch and ListerVirologystructure Genetics culture and diseasesAIDS and its controlBacteriology structure, Genetics and diseasesprotozoan microbiologyDiseases orientedpathogenecity of micro organismanti microbial resistance chemotherapy. Unit III: Immunology Innate immunity (Non specific) anatomical BarriersPhysiological barriersphagocytic barriers Lymphoidal organsThymus Bursa of fabriciusPeripheral Lymphoid organsLymph nodesSpleenantibodiesimmuno globulinsregions of polypeptide chainTransplantation immunologyclassification of graftsGenetic basis of organ transplantimmune system disorder. Unit IV: Modern Genetics IntroductionscopeHuman Genetics Karyotyping Chromosome gene mappingRecombinant DNA technology and segmenting genetic diseases  Human genome projectcloning Transgenic organisms Genetically modified organism(GMO)Gene therapyBio informatics application DNA Sequencing and protein structureBiological database. Unit V: Environmental Science Human population and explosionissueGlobal Warming Crisis  Green house effect  Ozone layer depletion waste management Biodiversity conservation (Biosphere reserve) Government and nongovernmental organization involvedEnergy crisis and environmental impactpoverty and environmentFreshwater crisis and management. Unit VI: Applied Biology Livestock and management DairyBreed of cattleMiltch breedDrought breed Dual purposecommon diseases and controlExotic and cross breedsTechniques adapted in cattle breeding. PoultryFarming techniques Breeds Farming method  poultry diseasesEconomic value Pisciculturefish farming Edible fishes of Tamil Nadu. Medical lab techniquesstethescopesphygmomonometer Haemocytometerurine sugar analysisECGPQRST Wave CT ScanEndoscopic (Laproscopic) techniques artificial pace makerAuto analyzer. Unit VII: Theories of Evolution LamarckismDarwinismNeodarwimsm/Modern concept of natural selection species of conceptorigin of species and isolating mechanism. 
#10
 
 
Re: SRMEEE 2009SRM Engineering Entrance Examination Test paper solution thanks, dude, 
#11
 
 
Re: SRMEEE 2009SRM Engineering Entrance Examination Test paper solution Is this the pattern for SRMEEE? PCMB. But if anyone didn't opted for biology in +2, then what should be the proper strategy to do the questions.and how many questions should be attempted to get a safe position? 
#12
 
 
Re: SRMEEE 2009SRM Engineering Entrance Examination Test paper solution Can U Pls Post Aieee 2009 Architecture Solution Key? 
#13
 
 
Re: SRMEEE 2009SRM Engineering Entrance Examination Test paper solution can i get the minimum marks scored last time by student who got into srm with ece or eee...... is there be any change in format in last yr n this yr paper??? 
#14
 
 
Re: SRMEEE 2009SRM Engineering Entrance Examination Test paper solution well what was the mark scored by the person who got the last rank last year in srmeee 
#15
 
 
Re: SRMEEE 2009SRM Engineering Entrance Examination Test paper solution can someone post the solutions of srmeee 2009....code A 

Tags: 2008 srmeee, 2009, btech, comedk, engineering, entrance, examination, iit model papers, mbapgpm, mca, mtech, paper, solution, srm, srm eee, srmeee, srmeee 2009, srmeee 2010, srmeee2009 paper, sureshbabu, viteee, viteee 2009 
Thread Tools  Search this Thread 

Similar Threads for: "SRMEEE 2009SRM Engineering Entrance Examination Test paper solution"  
Thread  Thread Starter  Forum  Replies  Last Post 
Amrita (AMIS) Entrance Examination PG Medical Entrance Examination MD / MS for 2010  WaGoN  Education Career and Job Discussions  1  02062011 05:35 AM 
Second Year Engineering Examination Timetable (Sem  IV)  2009  Rahul45  Education Career and Job Discussions  1  01052009 11:20 PM 
Delhi Engineering Entrance Exam 2009 ?  Manoj.J  Education Career and Job Discussions  0  10032009 12:59 AM 
wanted to know the entrance examination date of engineering course in manipal university  NavinS  Education Career and Job Discussions  2  28022009 07:05 PM 
Information about Engineering Entrance Exams 2009  Santosh12  Education Career and Job Discussions  1  04022009 12:54 PM 