Page 1 of 4 123 ... LastLast
Results 1 to 15 of 51

Thread: SRMEEE 2009-SRM Engineering Entrance Examination Test paper solution

  1. #1
    Join Date
    Apr 2009

    SRMEEE 2009-SRM Engineering Entrance Examination Test paper solution


    i have applied for SRMEEE 2009-SRM Engineering Entrance Examination Test before Last date for receipt of applications now the entrance Examination is on 03 May 2009 so i am looking for its past paper or sample paper and solution .if any one have please provide me thank you.

  2. #2
    Join Date
    May 2008

    Re: SRMEEE 2009-SRM Engineering Entrance Examination Test paper solution

    Pattern of Question paper for B.Tech Program
    Part 1: Physics 35 questions with a total weightage of 105 marks.
    Part 2: Chemistry 35 questions with a total weightage of 105 marks.
    Part 3: Mathematics 35 questions with a total weightage of 105 marks.
    Part 4: Biology 50 questions with a total weightage of 105 marks.
    Negative mark of 1 for every wrong answer in physics, chemistry & mathematics and 0.7 for
    every wrong answer in biology
    Total Weightage 315 marks.
    Note: Part 1 and Part 2 are compulsory for all candidates.

    download here test paper and solution

  3. #3
    Join Date
    Jun 2008

    Re: SRMEEE 2009-SRM Engineering Entrance Examination Test paper solution

    SRMEEE btech paper download

  4. #4
    Join Date
    Dec 2008

    Re: SRMEEE 2009-SRM Engineering Entrance Examination Test paper solution

    SRMEEE 2009 - Entrance Examination for B.TECH, M.TECH, MBA/PGPM, MCA programs is on May 3, 2009, Sunday, Between 10.00 am and 12.30 pm.

  5. #5
    Join Date
    Apr 2009

    question Re: SRMEEE 2009-SRM Engineering Entrance Examination Test paper solution

    wat type of syllabus covered in srm entrance examination?

  6. #6
    Join Date
    May 2008

    SRMEEE Mathematics Syllabus 2009

    SRMEEE Mathematics Syllabus 2009

    Part 3 - Mathematics (35 Questions)

    Unit 1: Sets, Relations and Functions Sets and their representations, union, intersection and complements of sets and their algebraic properties, relations, equivalence relations, mappings, one-one, into and onto mappings, composition of mappings.

    Unit 2: Complex Numbers Complex numbers in the form a+ib and their representation in a plane Argand diagram. Algebra of complex numbers, modulus and argument (or amplitude) of a complex number, square root of a complex number. Cube roots of unity, triangle inequality.

    Unit 3: Matrices and Determinants Determinants and matrices of order two and three, properties of determinants, evaluation of determinants. Addition and multiplication of matrices, adjoint and inverse of matrix.

    Unit 4: Applications of Matrices and Determinants Computing the rank of a matrix-test of consistency and solution of simultaneous linear equations using determinants and matrices.

    Unit 5: Quadratic Equations Quadratic equations in real and complex number system and their solutions. Relation between roots and co-efficients, nature of roots, formation of quadratic equations with given roots; symmetric functions of roots, equations reducible to quadratic equations.

    Unit 6: Permutations and Combinations Fundamental principle of counting: permutation as an arrangement and combination as selection, meaning of P(n,r) and C(n,r). Simple applications.

    Unit 7: Mathematical Induction and its Applications Stating and interpreting the principle of mathematical induction. Using it to prove formula and facts.

    Unit 8: Binomial theorem and its Applications Binomial theorem for a positive integral index; general term and middle term; Binomial theorem for any index. Properties of binomial co-efficients. Simple applications for approximations.

    Unit 9: Sequences and Series Arithmetic, geometric and harmonic progressions. Insertion of arithmetic, geometric and harmonic means between two given numbers. Relation between A.M., G.M. and H.M. arithmetic, geometric series, exponential and logarithmic series.

    Unit 10: Differential Calculus Polynomials, rational, trigonometric, logarithmic and exponential functions. Inverse functions.

    Graphs of simple functions. Limits, continuity, differentiation of the sum, difference, product and quotient of two functions, differentiation of trignometic, inverse trigonometric, logarithmic, exponential, composite and implicit functions, derivatives of order up to two.

    Unit 11: Applications of Differential Calculus Rate of change of quantities, monotonic-increasing and decreasing functions, maxima and minima of functions of one variable, tangents and normals, Rolle's and Lagrange's mean value theorems.

    Unit 12: Integral Calculus Integral as an anti-derivative. Fundamental integrals involving algebraic, trigonometric, exponential and logarithmic functions.

    Integration by substitution, by parts and by partial fractions. Integration using trigonometric identities. Integral as limit of a sum. Properties of definite integrals. Evaluation of definite integrals; Determining areas of the regions bounded by simple curves.

    Unit 13: Differential Equations Ordinary differential equations, their order and degree. Formation of differential equations.

    Solution of differential equations by the method of separation of variables. Solution of homogeneous and linear differential equations and those of the type d2y / dx2 = f(x).

    Unit 14: Straight Lines in Two Dimensions Cartesian system of rectangular co-ordinates in plane, distance formula, area of a triangle, condition for the collinearity of three points and section formula, centroid and in-centre of a triangle, locus and its equation, translation of axes, slope of a line, parallel and perpendicular lines, intercepts of a line on the coordinate axes.

    Various forms of equations of a line, intersection of lines, angles between two lines, conditions for concurrence of three lines, distance of a point from a line.

    Equations of internal and external bisectors of angles between two lines, coordinates of centroid, orthocentre and circumcentre of a triangle, equation of family of lines passing through the point of intersection of two lines, homogeneous equation of second degree in x and y, angle between pair of lines through the origin, combined equation of the bisectors of the angles between a pair of lines, condition for the general second degree equation to represent a pair of lines, point of intersection and angle between two lines.

    Unit 15: Circles in Two Dimensions Standard form of equation of a circle, general form of the equation of a circle, its radius and centre, equation of a circle in the parametric form, equation of a circle when the end points of a diameter are given, points of intersection of a line and a circle with the centre at the origin and condition for a line to be tangent to the circle, length of the tangent, equation of the tangent, equation of a family of circles through the intersection of two circles, condition for two intersecting circles to be orthogonal.

    Unit 16: Conic Sections in two Dimensions Sections of cones, equations of conic sections (parabola, ellipse and hyperbola) in standard form, condition for y = mx+c to be a tangent and point(s) of tangency.

    Unit 17: Vector Algebra Vectors and scalars, addition of vectors, components of a vector in two dimensions and three dimensional space, scalar and vector products, scalar and vector triple product. Application of vectors to plane geometry.

    Unit 18: Measures of Central Tendency and Dispersion Calculation of mean, median and mode of grouped and ungrouped data. Calculation of standard deviation, variance and mean deviation for grouped and ungrouped data.

    Unit 19: Probability Probability of an event, addition and multiplication theorems of probability and their applications; Conditional probability; Baye's theorem, probability distribution of a random variate; binomial and poisson distributions and their properties.

    Unit 20: Trignometry Trignometrical identities and equations. Inverse trigonometric functions and their properties. Properties of triangles, including, incentre,circumcentre and orthocenter, solution of triangles.

  7. #7
    Join Date
    May 2008

    SRMEEE Physics Syllabus 2009

    SRMEEE Physics Syllabus 2009

    Part 1 - Physics (35 Questions)

    Unit 1: Units and Measurement Units for measurement, system of units-S.I., fundamental and derived units, measurements-errors in measurement-significant figuresdimensions dimensional analysis-applications.

    Unit 2: Mechanics Motion in one dimension-uniform and non-uniform motion-uniformly accelerated motion-scalar and vector quantities-Newton's laws of motion-force and inertia-impulse and momentum-law of conservation of linear momentum-applications-motions in two dimension - projectile motion.

    Uniform circular motion-centripetal force-centre of mass-torqueangular momentum and its conservation-moment of inertia-theorems of moment of inertia-work-energy-potential energy and kinetic energypower - collision-elastic and inelastic collisions.

    Unit 3: Gravitation, Mechanics of Solids and Fluids the universal law of gravitation, acceleration due to gravity-variation of'g' with altitude, latitude and depth-gravitation potential-escape velocity and orbital velocity-geostationary satellites. Solids-elastic behaviour, stress-strain-Hooke's law-Modulli of elasticity-relation between themsurface tension-capillarity-applications-viscosity-Poiseuille's formula - Stokes law-applications-Bernoulli's theorem- applications.

    Unit 4: Oscillations and Wave Motion Periodic motion-simple harmonic motion-equations of motionoscillations of spring-simple pendulum-free, forced and damped oscillations-resonance-applications-wave motions-longitudinal and transverse waves-velocity of wave motion in different media-Newton's formula-Laplace's correction-super position of waves-progressive and standing waves-sonometer-air columns-Doppler effect and its applications.

    Unit 5: Heat and Thermodynamics Kinetic theory of gases-postulates-pressure of a gas-specific heat capacity-relation between Cp and Cv-first law of thermodynamicsthermodynamical processes-isothermal and adiabatic-reversible and irreversible process-second law of thermodynamics-Carnot's engine - Heat transfer-conduction-convection-radiation-thermal conductivity of solids-black body radiations-Kirchoff's law-Wien's displacement law-Stefan's law-Newton's law of cooling.

    Unit 6: Ray and Wave Optics and Magnetism Reflection and refraction of light-total internal reflection-velocity of light determination-deviation and dispersion of light by a prism-wave nature of light-interference-Young's double slit experiment-diffraction and polarization.

    Earth's magnetic field and magnetic elements-magnetic field due to a magnetic dipole-torque on a magnetic dipole-tangent lawtangent galvanometer-deflection magnetometer-magnetic properties of a material-dia, para and ferromagnetic materials-applications.

    Unit 7: Electrostatics and Electromagnetism Electrostatics-Coulomb's inverse square law-dielectric constant-electric field-electric lines of force-electric dipole-electric potential-potential difference-electric flux-Gauss theorem-electrostatic induction-capacitorcapacitors in parallel and series-action of points-lightning arrestorelectric current-drift velocity of electrons-Ohm's law-electrical resistivity and conductivity-super conductivity-Kirchoff's law-Wheatstone's bridge-principle of potentiometer-electric power-magnetic effects of electric current-Bio Savart law-force on a moving charge in an uniform magnetic field-moving coil galvanometer-conversion of a galvanometer into voltmeter and ammeter-Faraday's law-Lenz law of electromagnetic induction-Self inductance-mutual inductance-Flemming's right hand rule-methods of inducing emf-eddy current.

    Unit 8: Atomic Physics and Relativity Atomic structure-properties of cathode rays and positive rays-specific charge of an electron-atom model-Thomson atom model-Rutherford atom model-Bohr atom model-merits and demerits-quantum numbers-X-rays-production-properties-Bragg's law-Bragg's X-ray spectrometer-Photoelectric effect-laser-spontaneous and stimulated emission-laser action-characteristics of laser light-ruby laser-applications of laserrelativity-Einstein's mass energy relation-variation of mass with velocity.

    Unit 9: Dual Nature of Matter and Nuclear Physics Matter waves-wave nature of particles-De Broglie wavelength-electron microscope.

    Nuclear properties; radius, mass, binding energy, density,isotopes, mass defect- Bainbridge mass spectrometer-nuclear forcesneutron discovery-radioactivity-a, b and g decay-half life and mean life-artificial radio activity-radio isotopes-radio carbon dating-radiation hazards. Nuclear fission-nuclear reactor-nuclear fusion-hydrogen bombcosmic rays-elementary particles.

    Unit 10: Electronics and Communication Semiconductors-doping-types-PN junction diode-biasing-diode as a rectifier-transistors-transistor characteristics-amplifier-gain-feedback in amplifiers-logic gates-basic logic gates-NOT, OR, AND, NOR, NAND-universal gates-De Morgan's theorems-space communicationpropagation of electromagnetic waves in atmosphere-sky and space wave propagation-modulation types-demodulation-microwaves-radars.

  8. #8
    Join Date
    May 2008

    SRMEEE Chemistry Syllabus 2009

    SRMEEE Chemistry Syllabus 2009

    Part 2 - Chemistry

    Unit 1: Some Basic Concepts in Chemistry Matter and its nature, Dalton's atomic theory; concept of atom, molecule, element and compound; physical quantities and their measurements in chemistry, precision and accuracy, significant figures, S.I. Units, dimensional analysis; laws of chemical combination; atomic and molecular masses, mole concept, molar mass, percentage composition, empirical and molecular formulae; chemical equations and stoichiometry.

    Unit 2: States of Matter Classification of matter into solid, liquid and gaseous states.

    Solid State: Classification of solids: molecular, ionic, covalent and metallic solids, amorphous and crystalline solids (elementary idea); Bragg's Law and its applications; unit cell and lattices, packing in solids (fcc, bcc and hcp lattices), voids, calculations involving unit cell parameters, imperfection in solids; electrical, magnetic and dielectric properties.

    Liquid State: Properties of liquids - vapour pressure, viscosity and surface tension and effect of temperature on them (qualitative treatment only).

    Gaseous State: Measurable properties of gases; Gas laws-Boyle's law,Charle's law, Graham's law of diffusion, Avogadro's law, Dalton's law of partial pressure; concept of absolute scale of temperature; ideal gas equation, kinetic theory of gases (only postulates); concept of average, root mean square and most probable velocities; real gases, deviation from ideal behaviour, compressibility factor, Van der Waals equation, liquefaction of gases, critical constants.

    Unit 3: Chemical Families-Periodic Properties Modern periodic law and present form of the periodic table, s & p block elements, periodic trends in properties of elements, atomic and ionic radii, ionization enthalpy, electron gain enthalpy, valence, oxidation states and chemical reactivity.

    Transition elements-d-block elements, inner transition elements-f-block elements. Periodic trends in properties-ionization energy, electron affinity atomic radii, ionic radii and periodicity, lanthanides and actinides-general characteristics.

    Coordination Chemistry: Coordination compounds, nomenclature: terminology - Werner's coordination theory. Applications of coordination compounds.

    Unit 4: Atomic Structure Discovery of sub-atomic particles (electron, proton and neutron); Thomson and Rutherford atomic models and their limitations; nature of electromagnetic radiation, photoelectric effect; spectrum of hydrogen atom, Bohr model of hydrogen atom-its postulates, derivation of the relations for energy of the electron and radii of the different orbits,limitations of Bohr's model; dual nature of matter, De-Broglie's relationship, Heisenberg uncertainty principle.

    Elementary ideas of quantum mechanics, quantum mechanical model of atom, its important features, and 2, concept of atomic orbitals as one electron wave functions; Variation of and 2 with r for 1s and 2s orbitals; various quantum numbers (principal, angular momentum and magnetic quantum numbers) and their significance; shapes of s, p and d-orbitals, electron spin and spin quantum number; rules for filling electrons in orbitals-Aufbau principle, Pauli's exclusion principle and Hund's rule, electronic configuration of elements, extra stability of half-filled and completely filled orbitals.

    Unit 5: Chemical Bonding and Molecular Structure Covalent bonding: Concept of electronegativity, Fajan's rule, dipole moment; Valence Shell Electron Pair Repulsion (VSEPR) theory and shapes of simple molecules.

    Quantum mechanical approach to covalent bonding: Valence bond theory-Its important features, concept of hybridization involving s, p andd orbitals; resonance.

    Molecular orbital theory-Its important features, LCAOs, types of molecular orbitals (bonding, anti-bonding), sigma and pi-bonds, molecular orbital electronic configurations of homonuclear diatomic molecules, concept of bond order, bond length and bond energy. Elementary idea of metallic bonding. Hydrogen bonding and its applications.

    Unit 6: Chemical Energetics Energy changes during a chemical reaction, internal energy and enthalpy, internal energy and enthalpy changes, origin of enthalpy change in a reaction, Hess's law of constant heat summation, numerical, based on these concepts. Enthalpies of reactions (enthalpy of neutralization, enthalpy of combustion, enthalpy of fusion and vaporization).

    Unit 7: Chemical Thermodynamics First law of thermodynamics-Concept of work, heat internal energy and enthalpy, heat capacity, molar heat capacity; Hess's law of constant heat summation; enthalpies of bond dissociation, combustion, formation, atomization, sublimation, phase transition, hydration, ionization and solution.

    Second law of thermodynamics-Spontaneity of processes; DS of the universe and DG of the system as criteria for spontaneity, DGo (Standard Gibbs energy change) and equilibrium constant.

    Unit 8: Solutions Different methods for expressing concentration of solution-Molality, molarity, mole fraction, percentage (by volume and mass both), vapour pressure of solutions and Raoult's law-ideal and non-ideal solutions, vapour pressure-composition, plots for ideal and non-ideal solutions; colligative properties of dilute solutions-relative lowering of vapour pressure, depression of freezing point, elevation of boiling point and osmotic pressure; determination of molecular mass using colligative properties; abnormal value of molar mass, Van't Hoff factor and its significance.

    Unit 9: Chemical Equilibrium Meaning of equilibrium, concept of dynamic equilibrium. Equilibria involving physical processes: Solid-liquid, liquid-gas and solid-gas equilibria, Henry's law, general characterics of equilibrium involving physical processes.

    Equilibria involving chemical processes: Law of chemical equilibrium, equilibrium constants (Kp and Kc) and their significance, significance of DG and DGo in chemical equilibria, factors affecting equilibrium concentration, pressure, temperature, effect of catalyst; Le Chatelier's principle.

    Ionic equilibrium: Weak and strong electrolytes, ionization of electrolytes, various concepts of acids and bases (Arrhenius, BrOnsted-Lowry and Lewis) and their ionization, acid-base equilibria (including multistage ionization) and ionization constants, ionization of water, pH scale, common ion effect, hydrolysis of salts and pH of their solutions, solubility of sparingly soluble salts and solubility products, buffer solutions.

    Unit 10: Electrochemistry Electrolytic and metallic conduction, conductance in electrolytic solutions, specific and molar conductivities and their variation with concentration: Kohlrausch's law and its applications.

    Electrochemical cells-Electrolytic and Galvanic cells, different types of electrodes, electrode potentials including standard electrode potential, half-cell and cell reactions, emf of a galvanic cell and its measurement; Nernst equation and its applications; relationship between cell potential and Gibbs' energy change; dry cell and lead accumulator; fuel cells; corrosion and its prevention.

    Unit 11: Surface Chemistry, Chemical Kinetics and Catalysis Adsorption-Physisorption and chemisorption and their characteristics, factors affecting adsorption of gases on solids-Freundlich and Langmuir adsorption isotherms, adsorption from solutions.

    Catalysis-Homogeneous and heterogeneous, activity and selectivity of solid catalysts, enzyme catalysis and its mechanism.

    Collidal state-Distinction among true solutions, colloids and suspensions, classification of colloids-lyophilic, lyophobic; multi molecular, macromolecular and associated colloids (micelles), preparation and properties of colloids-Tyndall effect, Brownian movement, electrophoresis, dialysis, coagulation and flocculation; emulsions and their characteristics.

    Rate of reaction, instantaneous rate of reaction and order of reaction. Factors affecting rates of reactions-factors affecting rate of collisions encountered between the reactant molecules, effect of temperature on the reaction rate, concept of activation energy, catalyst.

    Rate law expression. Order of a reaction (with suitable examples). Units of rates and specific rate constants. Order of reaction and effect of concentration (study will be confined to first order only). Theories of catalysisadsorption theory-some of important industrial process using catalysts.

    Unit 12: Purification and Characterisation of Organic Compounds Purification-Crystallization, sublimation, distillation, differentialextraction and chromatography-principles and their applications.

    Qualitative analysis-Detection of nitrogen, sulphur, phosphorus and halogens. Quantitative analysis (basic principles only)-Estimation of carbon, hydrogen, nitrogen, halogens, sulphur, phosphorus.

    Calculations of empirical formulae and molecular formulae; numerical problems in organic quantitative analysis.

    Unit 13: Some Basic Principles of Organic Chemistry Tetravalency of carbon; shapes of simple molecules-hybridization (s and p); classification of organic compounds based on functional groups: -C=C-,-C?C- and those containing halogens, oxygen, nitrogen and sulphur; homologous series; isomerism-structural and stereoisomerism.

    Nomenclature (Trivial and IUPAC)

    Covalent bond fission- Homolytic and heterolytic: free radicals, carbocations and carbanions; stability of carbocations and free radicals, electrophiles and nucleophiles.

    Electronic displacement in a covalent bond-inductive effect, electromeric effect, resonance and hyperconjugation. Common types of organic reactions- Substitution, addition, elimination and rearrangement.

    Unit 14: Hydrocarbons Classification, isomerism, IUPAC nomenclature, general methods of preparation, properties and reactions.

    Alkanes-Conformations: Sawhorse and Newman projections (of ethane); mechanism of halogenation of alkanes.

    Alkenes-Geometrical isomerism; mechanism of electrophilic addition:

    addition of hydrogen, halogens, water, hydrogen halides (Markownikoff's and peroxide effect); ozonolysis, oxidation, and polymerization.

    Alkynes-Acidic character; addition of hydrogen, halogens, water and hydrogen halides; polymerization. Aromatic hydrocarbons - nomenclature, benzene-structure and aromaticity; mechanism of electrophilic substitution: halogenation, nitration, Friedel-Craft's alkylation and acylation, directive influence of functional group in monosubstituted benzene.

    Unit 15: Organic Compounds Containing Oxygen General methods of preparation, properties, reactions and uses. Alcohols: Identification of primary, secondary and tertiary alcohols; mechanism of dehydration.

    Phenols: Acidic nature, electrophilic substitution reactions: halogenation, nitration and sulphonation, Reimer-Tiemann reaction. Addition to >C=O group, relative reactivities of aldehydes and ketones Ethers: Structure.

    Aldehyde and Ketones: Nature of carbonyl group; Nucleophilic-Nucleophilic addition reactions (addition of HCN, NH3 and itsClemmensen); acidity of-hydrogen, aldol condensation, Cannizzaro reaction, Haloform reaction; Chemical tests to distinguish between aldehydes and Ketones. Carboxylic acids: Acidic strength and factors affecting it.

    Unit 16: Organic Compounds Containing Nitrogen General methods of preparation, properties, reactions and uses. Amines: Nomenclature, classification, structure, basic character and identification of primary, secondary and tertiary amines and their basic character. Diazonium salts: Importance in synthetic organic chemistry.

    Unit 17: Polymers General introduction and classification of polymers, general methods of polymerization-addition and condensation, copolymerization; natural and synthetic rubber and vulcanization; some important polymers with emphasis on their monomers and uses - polythene, nylon, polyester and bakelite.

    Unit 18: Bio Molecules Carbohydrates-Classification: aldoses and ketoses; monosaccharides (glucose and fructose), constituent monosaccharides of oligosacchorides (sucrose, lactose, maltose) and polysaccharides (starch, cellulose, glycogen).

    Proteins-Elementary Idea of-amino acids, peptide bond, polypeptides; proteins: primary, secondary, tertiary and quaternary structure (qualitative idea only), denaturation of proteins, enzymes.

    Vitamins-Classification and functions. Nucleic acids-Chemical constitution of DNA and RNA. Biological functions of nucleic acids.

    Unit 19: Chemistry in Everyday Life Chemicals in medicines- Analgesics, tranquilizers, antiseptics, disinfectants, antimicrobials, antifertility drugs, antibiotics, antacids.

    Antihistamins-their meaning and common examples. Chemicals in food-preservatives, artificial sweetening agents-common examples. Cleansing agents-Soaps and detergents, cleansing action.

  9. #9
    Join Date
    May 2008

    SRMEEE Biology Syllabus 2009

    SRMEEE Biology Syllabus 2009

    Part 4: Biology


    Unit I: Taxonomy of Angiosperm Types of classifications -Artificial, Natural, Phylogenetic - Biosystematics - Binomial Nomenclature - Herbaria and their uses - Bentham and Hooker's classification of plants - Families Malvaceae, Solanaceae - Euphorbiaceae, Musaceae and Economic Importance.

    Unit II: Plant Anatomy Tissues and Tissue System - anatomy of monocot and Dicot roots - anatomy of Monocot and dicot stem and anatomy of dicot leaf.

    Unit III: Cell Biology and Genetics Chromosomes - Structure and types - genes and genome - Linkage and crossing over - Gene mapping - recombination of chromosomes - mutation - chromosomal aberration - DNA as genetical material - Structure of DNA - replication of DNA - Structure of RNA and its type.

    Unit IV: Biotechnology Recombinant DNA Technology - Transgenic plants and microbes - plant tissue culture and its application - Protoplasmic fusion - single cell protein.

    Unit V: Plant Physiology Photosynthesis - Significance - site of photosynthesis - photochemical and biosynthetic phases - electron transport system - cyclic and non cyclic photophosphorylation - C3 and C4 pathway - photorespiration - factor affecting photosynthesis - mode of nutrition - autotrophic - heterotropic - saprophytic - parasitic and insectivorous plants - chemosynthesis - respiration - mechanism of glycolysis - kreb'scycle - pentose pathway - anaerobic respiration - respiratory quotient - compensation point - fermentation - plant growth - growth regulators - phytohormones - auxin - gibberellins - cytokinins - ethylene and abscisic acid - photoperiodism and vernalisation.

    Unit VI: Biology in Human Welfare Food production - breeding experiments - improved varieties and role of biofertilizer - crop diseases and their control - biopesticides - genetically modified food - biowar - biopiracy - biopatent - sustained agriculture and medicinal plants including microbes - Economic importance food yielding (rice) - Oil yielding (groundnut) fibre yielding (cotton) and timber yielding (teak)


    Unit I: Human Physiology Nutrition - introduction - carbohydrates - proteins - lipids - vitamins mineral - water - Balanced diet - calorie value - (ICBM standard )- obesity - Hyperglycemia - hypoglycemia - malnutrition. Digestion - enzymes and enzyme action - Brief account of following - Dental caries - Root canal therapy - peptic ulcer-Hernia-Appendicitis - Gallbladder stone - Liver cirrhosis - Hepatitis.

    Bones and Joints (Major types) fractures - Dislocations - Arthritis - Rickets and Osteomalasia - orthopaedies - Gout. Muscles - muscle action - muscle tone - Rigor Mortis - muscle pull (hernia) isometric and aerobic exercises (body building) myasthenia gravis.

    Respiration - Process of pulmonary respiration - inspiration Expiration - Exchange of gases at alveolar level - control of respiration - pneumonia - pleurisy - Tuberculosis - Bronchitis - Breathing exercise.

    Circulation - Functioning of heart origin and conduction of heart beat - Artificial pacemaker - coronary blood vessels and its significance - myocardial infraction - Angina pectoria - Angiogram - angioplasty and coronary bypass surgery - Atherosclerosis - heart attack - heart block - ECG and Echo Cardiography-heart valves-Rheumatic heart disease (RHD) ICCU-arterial and venous systems-Blood pressure-pulse rate-heart transplantation- Resuscitation in heart attack (First aid) Blood componentsfunctions- plasma-corpuscles-blood clotting-anticoagulants-Thrombosisembolism- blood related diseases like polycythemia-Leukemia-Lymph fluid.

    Physiological Co ordination System:

    Brain-functioning of different regions-memory-sleep-stroke-Alzheimer's disease-meningitis-Brain fever-conditioned reflexelectroencephalography-Right brain left brain concept-spinal cord-functioning-reflex action-CSF-chemical coordination-pituitary (Hormones of adenohypophysis and their regulation) Thyroid-parathyroid hormones-insulin and glucogon-Hormones of adrenal cortex and medulla-Reproductive hormones-problems related to secretion, non secretion of hormones.

    Receptor Organs:

    Eye-Focussing mechanism and photo chemistry of retina-short sightedness-Longsightedness-Optometry-Retinopathy- cataract -Lens replacement- Nectalopia-Eye infection-conjunctivities-Glucuoma- Eye care-Ear-Hearing mechanism-organ of corti-Hearing impairments and aids- Noise pollution and its importance-skin-melanin functions- Effect of solar radiation/UV Skin grafting-Dermatitis-Tongue-Gustatory reception.


    Ureotelism-urea-Biosynthesis(ornithine cycle) Nephron- ultrafiltration-tubular reabsorption and tubular secretion-Renal failure-Dialysis kidney stone formation kidney transplantation-Diabetes.

    Reproductive System:

    Brief account of spermatogenesis and oogenesis-menstrual cycle-in vitro fertilization-Birth control

    Unit II: Microbiology

    Introduction-History of medical microbiology-The influence of Pasteur, Koch and Lister-Virology-structure Genetics culture and diseases-AIDS and its control-Bacteriology structure, Genetics and diseases-protozoan microbiology-Diseases oriented-pathogenecity of micro organism-anti microbial resistance chemotherapy.

    Unit III: Immunology

    Innate immunity (Non specific)- anatomical Barriers-Physiological barriers-phagocytic barriers Lymphoidal organs-Thymus- Bursa of fabricius-Peripheral Lymphoid organs-Lymph nodes-Spleen-antibodiesimmuno globulins-regions of polypeptide chain-Transplantation immunology-classification of grafts-Genetic basis of organ transplantimmune system disorder.

    Unit IV: Modern Genetics

    Introduction-scope-Human Genetics Karyotyping Chromosome gene mapping-Recombinant DNA technology and segmenting- genetic diseases - Human genome project-cloning- Transgenic organisms- Genetically modified organism(GMO)-Gene therapy-Bio informatics application DNA Sequencing and protein structure-Biological database.

    Unit V: Environmental Science

    Human population and explosion-issue-Global Warming Crisis - Green house effect - Ozone layer depletion- waste management- Biodiversity conservation (Biosphere reserve) Government and non-governmental organization involved-Energy crisis and environmental impact-poverty and environment-Freshwater crisis and management.

    Unit VI: Applied Biology

    Livestock and management Dairy-Breed of cattle-Miltch breed-Drought breed Dual purpose-common diseases and control-Exotic and cross breeds-Techniques adapted in cattle breeding.

    Poultry-Farming techniques- Breeds- Farming method - poultry diseases-Economic value Pisciculture-fish farming- Edible fishes of Tamil Nadu.

    Medical lab techniques-stethescope-sphygmomonometer Haemocytometer-urine sugar analysis-ECG-PQRST Wave CT Scan-Endoscopic (Laproscopic) techniques artificial pace maker-Auto analyzer.

    Unit VII: Theories of Evolution Lamarckism-Darwinism-Neodarwimsm/Modern concept of natural selection- species of concept-origin of species and isolating mechanism.

  10. #10
    Join Date
    Apr 2009

    Re: SRMEEE 2009-SRM Engineering Entrance Examination Test paper solution

    thanks, dude,

  11. #11
    Join Date
    Apr 2009

    Post Re: SRMEEE 2009-SRM Engineering Entrance Examination Test paper solution

    Is this the pattern for SRMEEE? PCMB. But if anyone didn't opted for biology in +2, then what should be the proper strategy to do the questions.and how many questions should be attempted to get a safe position?

  12. #12
    Join Date
    Apr 2009

    Re: SRMEEE 2009-SRM Engineering Entrance Examination Test paper solution

    Can U Pls Post Aieee 2009 Architecture Solution Key?

  13. #13
    Join Date
    Apr 2009

    Re: SRMEEE 2009-SRM Engineering Entrance Examination Test paper solution

    can i get the minimum marks scored last time by student who got into srm with ece or eee...... is there be any change in format in last yr n this yr paper???

  14. #14
    Join Date
    May 2009

    Re: SRMEEE 2009-SRM Engineering Entrance Examination Test paper solution

    well what was the mark scored by the person who got the last rank last year in srmeee

  15. #15
    Join Date
    May 2009

    Re: SRMEEE 2009-SRM Engineering Entrance Examination Test paper solution

    can someone post the solutions of srmeee 2009....code A

Page 1 of 4 123 ... LastLast

Similar Threads

  1. Amrita (AMIS) Entrance Examination PG Medical Entrance Examination MD / MS for 2010
    By WaGoN in forum Education Career and Job Discussions
    Replies: 1
    Last Post: 02-06-2011, 05:35 AM
  2. Second Year Engineering Examination Timetable (Sem - IV) - 2009
    By Rahul45 in forum Education Career and Job Discussions
    Replies: 1
    Last Post: 01-05-2009, 11:20 PM
  3. Delhi Engineering Entrance Exam 2009 ?
    By Manoj.J in forum Education Career and Job Discussions
    Replies: 0
    Last Post: 10-03-2009, 12:59 AM
  4. Replies: 2
    Last Post: 28-02-2009, 06:05 PM
  5. Information about Engineering Entrance Exams 2009
    By Santosh12 in forum Education Career and Job Discussions
    Replies: 1
    Last Post: 04-02-2009, 11:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts