Results 1 to 4 of 4

Thread: There are no more endpoints available from the endpoint mapper

  1. #1
    Joel_uk Guest

    There are no more endpoints available from the endpoint mapper

    Joining computers to the domain from a remote site fail with the error shown
    in the subject title. Using the articles below i have tried the resolutions
    shown and yet i still can't establish the exact cause of this issue.
    Initially i thought this was a networking issue but using Portquery.exe to
    test the 'Domain and Services' ports shows their are open. I know the
    services are running on the DC's, as joining a workstation to the domain from
    the Head Office works. The connection between the head office and remote
    site is using an VPN over an ADSL link. Checking the line utilisation shows
    the line is hardly being used (5-10%).

    Reviewing the NetSetup.log shows the correct DC is located but reports the
    error as 'NetpGetComputerObjectDn: Unable to bind to DS on '\\DC8': 0x6d9'.
    '0x6d9' translates to 1753 which using 'net helpmsg 1753' returns the
    endpoint mapper error in the subject title.

    Has anyone got a resolution or experienced this before?


    Articles:
    How to troubleshoot RPC Endpoint Mapper errors
    http://support.microsoft.com/kb/839880

    Join and Authentication Issues
    http://www.microsoft.com/technet/pro....mspx?mfr=true

    NetSetup.log
    01/25 17:33:23 NetpDoDomainJoin
    01/25 17:33:23 NetpMachineValidToJoin: 'WORKSTATION'
    01/25 17:33:23 NetpGetLsaPrimaryDomain: status: 0x0
    01/25 17:33:23 NetpMachineValidToJoin: status: 0x0
    01/25 17:33:23 NetpJoinDomain
    01/25 17:33:23 Machine: WORKSTATION
    01/25 17:33:23 Domain: DOMAIN\DC8
    01/25 17:33:23 MachineAccountOU: (NULL)
    01/25 17:33:23 Account: DOMAIN\ADMINISTRATOR
    01/25 17:33:23 Options: 0x3
    01/25 17:33:23 OS Version: 5.1
    01/25 17:33:23 Build number: 2600
    01/25 17:33:23 ServicePack: Service Pack 2
    01/25 17:33:23 NetpValidateName: checking to see if 'DOMAIN' is valid as
    type 3 name
    01/25 17:33:23 NetpCheckDomainNameIsValid [ Exists ] for 'DOMAIN' returned 0x0
    01/25 17:33:23 NetpValidateName: name 'DOMAIN' is valid for type 3
    01/25 17:33:24 NetpJoinDomain: status of connecting to dc '\\DC8': 0x0
    01/25 17:33:24 NetpJoinDomain: Passed DC '\\DC8' NOT verified as DNS name
    '\\DC8.DOMAIN.LOCAL'
    01/25 17:33:24 NetpJoinDomain: Passed DC '\\DC8' verified as Netbios name
    '\\DC8'
    01/25 17:33:24 NetpGetLsaPrimaryDomain: status: 0x0
    01/25 17:33:24 NetpGetDnsHostName: Read NV Hostname: WORKSTATION
    01/25 17:33:24 NetpGetDnsHostName: PrimaryDnsSuffix defaulted to DNS domain
    name: DOMAIN.LOCAL
    01/25 17:33:24 NetpLsaOpenSecret: status: 0xc0000034
    01/25 17:33:25 NetpManageMachineAccountWithSid: NetUserAdd on '\\DC8' for
    'WORKSTATION$' failed: 0x8b0
    01/25 17:33:26 NetpManageMachineAccountWithSid: status of attempting to set
    password on '\\DC8' for 'WORKSTATION$': 0x0
    01/25 17:33:26 NetpJoinDomain: status of creating account: 0x0
    01/25 17:33:31 NetpGetComputerObjectDn: Unable to bind to DS on '\\DC8': 0x6d9
    01/25 17:33:31 NetpSetDnsHostNameAndSpn: NetpGetComputerObjectDn failed: 0x6d9
    01/25 17:33:31 ldap_unbind status: 0x0
    01/25 17:33:31 NetpJoinDomain: status of setting DnsHostName and SPN: 0x6d9
    01/25 17:33:31 NetpJoinDomain: initiaing a rollback due to earlier errors
    01/25 17:33:32 NetpGetLsaPrimaryDomain: status: 0x0
    01/25 17:33:32 NetpManageMachineAccountWithSid: status of disabling account
    'WORKSTATION$' on '\\DC8': 0x0
    01/25 17:33:32 NetpJoinDomain: rollback: status of deleting computer
    account: 0x0
    01/25 17:33:32 NetpLsaOpenSecret: status: 0x0
    01/25 17:33:33 NetpJoinDomain: rollback: status of deleting secret: 0x0
    01/25 17:33:33 NetpJoinDomain: status of disconnecting from '\\DC8': 0x0
    01/25 17:33:33 NetpDoDomainJoin: status: 0x6d9




  2. #2
    Jorge Silva Guest

    Re: There are no more endpoints available from the endpoint mapper

    Hi
    Most of the times this is a FW issue or DNS, check those.

    --
    I hope that the information above helps you.
    Have a Nice day.

    Jorge Silva
    MCSE, MVP Directory Services

  3. #3
    Joel_uk Guest

    Re: There are no more endpoints available from the endpoint mapper

    Hi Jorge,

    This is not a DNS issue as the NetSetup.log shows, the computer is
    successfully locating the DC and discovering the LDAP service (\\DC8), it
    fails during the bind process. This failure sounds like a FW issue, but to
    resolve i need clear prove. As the microsoft tool, portquery.exe,
    successfully confirmed access to all Directory required ports I'm finding it
    difficult to prove. As stated below, this site is connected over a VPN
    tunnel and although the band width is adequate the latency is around 23-28ms.
    Surely this isn't to much for an RPC connection?

    The only other point i can think of confirming is that it is not being
    effected by GPO's being restricted on low bandwidth sites. As the security
    settings are quite high, it's possible that this is causing the
    success/failure difference between the HQ and remote site.

    Any other suggestions would be appreciated.

    Thanks

    "Jorge Silva" wrote:

    > Hi
    > Most of the times this is a FW issue or DNS, check those.
    >
    > --
    > I hope that the information above helps you.
    > Have a Nice day.
    >
    > Jorge Silva
    > MCSE, MVP Directory Services


  4. #4
    Jorge Silva Guest

    Re: There are no more endpoints available from the endpoint mapper

    Okay,
    Please review the following
    Active Directory in Networks Segmented by Firewalls
    http://www.microsoft.com/downloads/d...displaylang=en

    Also have a look at the MTU size, I'm saying this because there was I known
    issue with MTU Size in ADSL routers, as far as I know this problem is not
    commum these days, but you never know.

    --
    I hope that the information above helps you.
    Have a Nice day.

    Jorge Silva
    MCSE, MVP Directory Services
    "Joel_uk" <Joeluk@discussions.microsoft.com> wrote in message
    news:5E149E22-5649-40DE-9424-5274DC764C71@microsoft.com...
    > Hi Jorge,
    >
    > This is not a DNS issue as the NetSetup.log shows, the computer is
    > successfully locating the DC and discovering the LDAP service (\\DC8), it
    > fails during the bind process. This failure sounds like a FW issue, but
    > to
    > resolve i need clear prove. As the microsoft tool, portquery.exe,
    > successfully confirmed access to all Directory required ports I'm finding
    > it
    > difficult to prove. As stated below, this site is connected over a VPN
    > tunnel and although the band width is adequate the latency is around
    > 23-28ms.
    > Surely this isn't to much for an RPC connection?
    >
    > The only other point i can think of confirming is that it is not being
    > effected by GPO's being restricted on low bandwidth sites. As the
    > security
    > settings are quite high, it's possible that this is causing the
    > success/failure difference between the HQ and remote site.
    >
    > Any other suggestions would be appreciated.
    >
    > Thanks
    >
    > "Jorge Silva" wrote:
    >
    >> Hi
    >> Most of the times this is a FW issue or DNS, check those.
    >>
    >> --
    >> I hope that the information above helps you.
    >> Have a Nice day.
    >>
    >> Jorge Silva
    >> MCSE, MVP Directory Services



Similar Threads

  1. Maemo Mapper on Nokia N900
    By Bower in forum Portable Devices
    Replies: 5
    Last Post: 22-01-2011, 12:13 AM
  2. Mapper Repository for Maemo operating system
    By "Dritan" in forum Operating Systems
    Replies: 4
    Last Post: 15-01-2011, 05:31 AM
  3. Endpoint mapper error when joining a computer to domain
    By Cris Han in forum Active Directory
    Replies: 2
    Last Post: 08-05-2008, 05:57 PM
  4. Replies: 2
    Last Post: 15-01-2007, 11:06 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,711,648,505.10869 seconds with 17 queries