Windows 2003 FRS Errors

Hi,

I have just upgraded my NT domain to Windows 2003 AD via in-place upgrade
method. Then I proceeded to add 2 new DCs (new machines) to the domain
through joining them as members and then DCPROMO.

All the permissions and trusts previously existing in NT seemed ok. however,
when I ran the FRSDIAG.EXE tool, it gave a couple of errors which I can't
figure out. Appreciate any help to decipher this. Below is a copy of the
FRSDIAG log:


Checking for errors/warnings in FRS Event Log .... passed
Checking for errors in Directory Service Event Log .... passed
Checking for minimum FRS version requirement ... passed
Checking for errors/warnings in ntfrsutl ds ... passed
Checking for Replica Set configuration triggers... passed
Checking for suspicious file Backlog size... passed
Checking Overall Disk Space and SYSVOL structure (note: integrity is not
checked)... passed
Checking for suspicious inlog entries ... passed
Checking for suspicious outlog entries ... passed
Checking for appropriate staging area size ... passed
Checking for errors in debug logs ...
ERROR on NtFrs_0003.log : "IBCO_FETCH_RETRY" : 1/ 7-04:18:24 :T: LocnCmd:
Create State: IBCO_FETCH_RETRY ReplicaName: DOMAIN SYSTEM VOLUME
(SYSVOL SHARE) (1)
ERROR on NtFrs_0003.log : "IBCO_FETCH_RETRY" : 1/ 7-04:18:24 :T: LocnCmd:
Create State: IBCO_FETCH_RETRY ReplicaName: DOMAIN SYSTEM VOLUME
(SYSVOL SHARE) (1)
ERROR on NtFrs_0003.log : "RPC_S_CALL_FAILED_DNE(Indicates RPC Session was
established to target, but there was a failure to send RPC call package.
Check for Networking problems!)" : <SndCsMain: 1552:
883: S0: 04:18:24> ++ ERROR - EXCEPTION (000006bf) : WStatus:
RPC_S_CALL_FAILED_DNE
ERROR on NtFrs_0003.log : "RPC_S_CALL_FAILED_DNE(Indicates RPC Session was
established to target, but there was a failure to send RPC call package.
Check for Networking problems!)" : <SndCsMain: 1552:
884: S0: 04:18:24> :SR: Cmd 00cb6a70, CxtG d24f588f, WS
RPC_S_CALL_FAILED_DNE, To \\distdc.YCH.COM Len: (1336) [SndFail - rpc
exception]
ERROR on NtFrs_0003.log : "RPC_S_CALL_FAILED_DNE(Indicates RPC Session was
established to target, but there was a failure to send RPC call package.
Check for Networking problems!)" : <SndCsMain: 1552:
904: S0: 04:18:24> :SR: Cmd 00cb6a70, CxtG d24f588f, WS
RPC_S_CALL_FAILED_DNE, To \\distdc.YCH.COM Len: (1336) [SndFail - Send
Penalty]

Found 2 IBCO_FETCH_RETRY error(s)! Latest ones (up to 3) listed above
Found 3 RPC_S_CALL_FAILED_DNE error(s)! Latest ones (up to 3) listed above

......... failed with 5 error entries
Checking NtFrs Service (and dependent services) state...passed
Checking NtFrs related Registry Keys for possible problems...passed
Checking Repadmin Showreps for errors...passed

Any help is greatly appreciated!! Thanks!

So you have:
1 upgrade W2K3 DC from NT4
2 fresh installed W2K3 DCs

On which DC did you run FRSDIAG?

any event id errors?

please run
DCDIAG /D /C /V
NETDIAG /DEBUG /V

post back only the parts in error

--

Cheers,
(HOPEFULLY THIS INFORMATION HELPS YOU!)
# Jorge de Almeida Pinto #
BLOG --> http://blogs.dirteam.com/blogs/jorge/default.aspx
-----------------------------------------------------------------------------
* This posting is provided "AS IS" with no warranties and confers no rights!
* Always test before implementing!
-----------------------------------------------------------------------------


-----------------------------------------------------------------------------
"rK" <rK@discussions.microsoft.com> wrote in message
news:8B80A4AB-2F9C-4A70-B7F0-86AF2D338D45@microsoft.com...
> Hi,
>
> I have just upgraded my NT domain to Windows 2003 AD via in-place upgrade
> method. Then I proceeded to add 2 new DCs (new machines) to the domain
> through joining them as members and then DCPROMO.
>
> All the permissions and trusts previously existing in NT seemed ok.
> however,
> when I ran the FRSDIAG.EXE tool, it gave a couple of errors which I can't
> figure out. Appreciate any help to decipher this. Below is a copy of the
> FRSDIAG log:
>
>
> Checking for errors/warnings in FRS Event Log .... passed
> Checking for errors in Directory Service Event Log .... passed
> Checking for minimum FRS version requirement ... passed
> Checking for errors/warnings in ntfrsutl ds ... passed
> Checking for Replica Set configuration triggers... passed
> Checking for suspicious file Backlog size... passed
> Checking Overall Disk Space and SYSVOL structure (note: integrity is not
> checked)... passed
> Checking for suspicious inlog entries ... passed
> Checking for suspicious outlog entries ... passed
> Checking for appropriate staging area size ... passed
> Checking for errors in debug logs ...
> ERROR on NtFrs_0003.log : "IBCO_FETCH_RETRY" : 1/ 7-04:18:24 :T: LocnCmd:
> Create State: IBCO_FETCH_RETRY ReplicaName: DOMAIN SYSTEM VOLUME
> (SYSVOL SHARE) (1)
> ERROR on NtFrs_0003.log : "IBCO_FETCH_RETRY" : 1/ 7-04:18:24 :T: LocnCmd:
> Create State: IBCO_FETCH_RETRY ReplicaName: DOMAIN SYSTEM VOLUME
> (SYSVOL SHARE) (1)
> ERROR on NtFrs_0003.log : "RPC_S_CALL_FAILED_DNE(Indicates RPC Session was
> established to target, but there was a failure to send RPC call package.
> Check for Networking problems!)" : <SndCsMain: 1552:
> 883: S0: 04:18:24> ++ ERROR - EXCEPTION (000006bf) : WStatus:
> RPC_S_CALL_FAILED_DNE
> ERROR on NtFrs_0003.log : "RPC_S_CALL_FAILED_DNE(Indicates RPC Session was
> established to target, but there was a failure to send RPC call package.
> Check for Networking problems!)" : <SndCsMain: 1552:
> 884: S0: 04:18:24> :SR: Cmd 00cb6a70, CxtG d24f588f, WS
> RPC_S_CALL_FAILED_DNE, To \\distdc.YCH.COM Len: (1336) [SndFail - rpc
> exception]
> ERROR on NtFrs_0003.log : "RPC_S_CALL_FAILED_DNE(Indicates RPC Session was
> established to target, but there was a failure to send RPC call package.
> Check for Networking problems!)" : <SndCsMain: 1552:
> 904: S0: 04:18:24> :SR: Cmd 00cb6a70, CxtG d24f588f, WS
> RPC_S_CALL_FAILED_DNE, To \\distdc.YCH.COM Len: (1336) [SndFail - Send
> Penalty]
>
> Found 2 IBCO_FETCH_RETRY error(s)! Latest ones (up to 3) listed above
> Found 3 RPC_S_CALL_FAILED_DNE error(s)! Latest ones (up to 3) listed above
>
> ......... failed with 5 error entries
> Checking NtFrs Service (and dependent services) state...passed
> Checking NtFrs related Registry Keys for possible problems...passed
> Checking Repadmin Showreps for errors...passed
>
> Any help is greatly appreciated!! Thanks!
>